No abstract

No abstract

No abstract

No abstract

No abstract

In this article, the problem of robust trajectory tracking, for a parallel robot is tackled via an observer-based active disturbance rejection controller. The proposed design method is based on purely linear disturbance observation and linear feedback control techniques modulo nonlinear input gain injections and cancellations. The estimations are carried out through Generalized Proportional Integral (GPI) observers, endowed with output integral injection to ease the presence of possible zero mean measurement noise effects. As the lumped (both exogenous and endogenous) disturbance inputs are estimated, they are being used in the linear controllers for on-line disturbance cancellation, while the phase variables are being estimated by the same GPI observer. The estimations of the phase variables are used to complete a linear multivariable output feedback controller. The proposed control scheme does not need the exact knowledge of the system, which is a good alternative to classic control schemes such as computed torque method, reducing the computation time. The estimation and control method is approximate, ensuring small as desired reconstruction and tracking errors. The reported results, including laboratory experiments, are better than the results provided by the classical model-based techniques, shown to be better when the system is subject to endogenous and exogenous uncertainties. ).A. Luviano-Juárez is with UPIITA-IPN,

This article presents an active vibration control of seismically excited building structures. The control scheme is based on active disturbance rejection control, which is an attractive alternative technique for structural vibration suppression and practical motion control solution in the presence of parametric uncertainties and disturbances. The proposed active disturbance rejection control scheme uses a generalized proportional integral observer, which allows us to estimate in real time the unknown dynamics and disturbances in the building structure to cancel their effect using a part of the control signal. First, the active disturbance rejection control provides a proportional derivative controller with robustness to external disturbances and uncertainties, and its structure is expressed in a compact error-based form. An important advantage with respect to other methods is that the proposed scheme does not need the system parameters. Moreover, supposing that displacement and velocity cannot be measured directly, an online robust adaptive observer is introduced to estimate both data, required for the proportional derivative controller. The adaptive observer removes constant disturbance and attenuates measurement noise in acceleration data. Under this line, a second active disturbance rejection control scheme is introduced based on a proportional controller that, unlike proportional derivative, it only needs the velocities that can be directly estimated by integrating the acceleration signals and does not require the adaptive observer. An advantage of this scheme is its simplicity to be implemented because it only needs to tune the proportional gain. Furthermore, this scheme has a similar performance of the proportional derivative controller. The effectiveness of the proposed active disturbance rejection control schemes is demonstrated through experimental results of a reduced scale five-story building structure. The results are found to be a good step in that direction, confirming that the proposed method is promising for practical applications.

In this work, the problem of trajectory tracking in uncertain underactuated systems is considered. To solve it, a combination of differential flatness and active disturbance rejection control (ADRC) is proposed. The controller design is synthesized in the absence of detailed knowledge of the system model and focuses on dealing with over-amplification of measurement noise, typically seen in conventional single high-gain observer-centered control approaches. The introduced solution is based on fully utilizing the information already available about the governed system, without the necessity for additional measurement devices. To be easily implementable, it is expressed in an industry familiar error-based form with a straightforward tuning method. Through experimental verification, the proposed approach is shown to enhance the disturbance-rejection capabilities of the standard ADRC structure and reduce its sensitivity to measurement noise, thus increasing its practical appeal.