Bacterial cellulose/carboxymethylcelullose (BC/CMC) biocomposites with different DS-CMC (DS from 0.7 to 1.2) were developed in order to evaluate their impact as a drug delivery system. Biocomposites were loaded with methotrexate (MTX) as an alternative for the topical treatment of psoriasis. Scanning electron microscopy and atomic force microscopy showed that the CMC coated the cellulose nanofibers, leading to the decrease of the elastic modulus as the DS of CMC increased. BC/CMC0.9 exhibited the lower liquid uptake (up to 11 times lower), suggesting that the more linear structure of the intermediate substitute CMC grade (0.9) was able to interact more strongly with BC, resulting in a denser structure. All samples showed a typical burst release effect in the first 15min of test, however the BC/CMC0.9 biocomposite promoted a slight lowering of MTX release rates, suggesting that the DS of CMC can be considered the key factor to modulate the BC properties.

Despite fast advances in genomics and proteomics, monoclonal antibodies (mAbs) are still a valuable tool for areas such as the evolution of basic research in stem cells and cancer, for immunophenotyping cell populations, diagnosing and prognosis of diseases, and for immunotherapy. To summarize different subtractive immunization approaches successfully used for the production of highly specific antibodies, we identified scientific articles in NCBI PubMed using the following search terms: subtractive immunization, monoclonal antibody, tolerization, neonatal, high-zone tolerance, masking immunization. Patent records were also consulted. From the list of results, we included all available reports, from 1985 to present, that used any enhanced immunization technique to produce either polyclonal or monoclonal antibodies. Our examination yielded direct evidence that these enhanced immunization techniques are efficient in obtaining specific antibodies to rare epitopes, with different applications, such as to identify food contaminants or tumor cells.

We report an immunization technique that can update the production of monoclonal antibodies (mAbs): the multiple tolerization subtractive immunization (MTSI). A total of 10 BALB/C mice were used. Animals in group 1 received one inoculation of RWPE-1 cells (nontumoral), followed by cyclophosphamide, and then received serial inoculations of nonirradiated PC3 cells (tumoral). Animals in group 2 received our MTSI protocol, as follows: one inoculation of RWPE-1 cells, followed by cyclophosphamide (Cy). This whole tolerization step was repeated three other times, with 14-day intervals between the last Cy exposure and the next RWPE-1 cell inoculation. Finally, the animals received the same nonirradiated PC3 cell exposure as group 1. Blood was taken from each animal, and their polyclonal sera individually tested against the nontumoral RWPE-1 cells in flow cytometry. We found out that, after the MTSI was employed, the serum of the immunized animals, in group 2, contained considerably less antibodies that reacted against the tolerogenic cells, compared with the serum of the animals that underwent regular subtractive immunization. We showed that, by repeating the tolerization cycles, the polyclonal antibodies produced by mice have a reduced specificity toward common/immunodominant epitopes present at nontumoral cells, and thus this technique can be readily used by others in studies involving murine mAb protocols.

Novel luminescent In-based lead-free double halide perovskites co-doped with Yb3+/Er3+ have been synthesized. Their primary thermometer performance was assessed and their biological application to predict temperature was evaluated.

As the development of nanotechnology progresses, organic electronics have gained momentum in recent years, and the production and rapid development of electronic devices based on organic semiconductors, such as organic light-emitting diodes (OLEDs), organic photovoltaic cells (OPVs), and organic field effect transistors (OFETs), among others, have excelled. Their uses extend to the fabrication of intelligent screens for televisions and portable devices, due to their flexibility and versatility. Lately, great efforts have been reported in the literature to use them in the biomedical field, such as in photodynamic therapy. In tandem, there has been considerable interest in the design of advanced materials originating from natural sources. Bacterial nanocellulose (BNC) is a natural polymer synthesized by many microorganisms, notably by non-pathogenic strains of Komagataeibacter (K. xylinus, K. hansenii, and K. rhaeticus). BNC shows distinct physical and mechanical properties, including its insolubility, rapid biodegradability, tensile strength, elasticity, durability, and nontoxic and nonallergenic features, which make BNC ideal for many areas, including active and intelligent food packaging, sensors, water remediation, drug delivery, wound healing, and as conformable/flexible substrates for application in organic electronics. Here, we review BNC production methods, properties, and applications, focusing on electronic devices, especially OLEDs and flexible OLEDs (FOLEDs). Furthermore, we discuss the future progress of BNC-based flexible substrate nanocomposites.

A three-dimensional (3D) lung aggregate model based on sodium alginate scaffolds was developed to study the interactions between Paracoccidioides brasiliensis (Pb) and lung epithelial cells. The suitability of the 3D aggregate as an infection model was examined using cell viability (cytotoxicity), metabolic activity, and proliferation assays. Several studies exemplify the similarity between 3D cell cultures and living organisms, which can generate complementary data due to the greater complexity observed in these designed models, compared to 2D cell cultures. A 3D cell culture system of human A549 lung cell line plus sodium alginate was used to create the scaffolds that were infected with Pb18. Our results showed low cytotoxicity, evidence of increased cell density (indicative of cell proliferation), and the maintenance of cell viability for seven days. The confocal analysis revealed viable yeast within the 3D scaffold, as demonstrated in the solid BHI Agar medium cultivation. Moreover, when ECM proteins were added to the alginate scaffolds, the number of retrieved fungi was significantly higher. Our results highlight that this 3D model may be promising for in vitro studies of host–pathogen interactions.

No abstract

This study reports the fabrication of polymeric matrices through electrospinning using polymethyl methacrylate (PMMA) and poly(lactic-co-glycolic acid) (PLGA), biocompatible polymers commonly used in medical systems. These polymers were combined with an antibacterial drug, sulfadiazine sodium salt (SDS) or its supramolecular system formed with hydroxypropyl-β-cyclodextrin (HPβ/CD) at 1:1 molar ratio, aiming to assemble a transdermal drug delivery system. The formation of fibers was confirmed by scanning electron microscopy (SEM), and the fibers’ surface properties were analyzed using contact angle and water vapor permeability techniques. Drug release tests and cell viability assays were performed to evaluate the potential toxicity of the material. SEM images demonstrated that the obtained fibers had nanoscale- and micrometer-scale diameters in PLGA and PMMA systems, respectively. The contact angle analyses indicated that, even in the presence of hydrophilic molecules (SDS and HPβCD), PMMA fibers exhibited hydrophobic characteristics, while PLGA fibers exhibited hydrophilic surface properties. These data were also confirmed by water vapor permeability analysis. The drug release profiles demonstrated a greater release of SDS in the PLGA system. Moreover, the presence of HPβCD improved the drug release in both polymeric systems and the cell viability in the PMMA SDS/HPβCD system. In terms of antibacterial activity, all membranes yielded positive outcomes; nevertheless, the PLGA SDS/HPβCD membrane exhibited the most remarkable results, with the lowest microbial load values. Additionally, the pseudo wound healing analysis demonstrated that the PLGA SDS/HPβCD fiber exhibited results similar to the control group. Consequently, these findings exemplify the substantial potential of the obtained materials for use in wound healing applications.