No abstract

Ultrahigh-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry was applied for the identification of transformation products (TPs) of fluoroquinolone (norfloxacin and ciprofloxacin) and macrolide (azithromycin, erythromycin, and roxitromycin) antimicrobials in wastewater effluents from a Zenon hollow-fiber membrane bioreactor (MBR). The detected TPs were thoroughly characterized using the accurate mass feature for the determination of the tentative molecular formulae and MS-MS experiments for the structural elucidation of unknowns. Several novel TPs, which have not been previously reported in the literature, were identified. The TPs of azithromycin and roxithromycin, identified in MBR effluent, were conjugate compounds, which were formed by phosphorylation of desosamine moiety. Transformation of fluoroquinolones yielded two types of products: conjugates, formed by succinylation of the piperazine ring, and smaller metabolites, formed by an oxidative break-up of piperazine moiety to form the 7-[(2-carboxymethyl)amino] group. A semi-quantitative assessment of these TPs suggested that they might have contributed significantly to the overall balance of antimicrobial residues in MBR effluents and thus to the overall removal efficiency. Determination of TPs during a period of 2 months indicated a conspicuous dynamics, which warrants further research to identify microorganisms involved and treatment conditions leading to their formation.

Behaviour of anionic surfactants of linear alkylbenzene sulphonates (LAS) type and non-ionic surfactants of nonylphenol polyethoxylate (NPnEO) type was studied in the conventional mechanical/biological sewage treatment plant (STP) as well as using a membrane biological reactor (MBR). LAS and NPnEO were determined using high performance liquid chromatography (HPLC) equipped with spectrofluorimetric detection. Liquid chromatography/tandem mass spectrometry (LC/MS/MS) was used for identification and quantification of stable metabolites, including nonylphenol (NP), nonylphenol monoethoxylate (NP1EO), nonylphenol diethoxylate (NP2EO) and nonylphenoxy carboxylic acids (NPnEC). The study showed that aromatic surfactants belong to the most prominent constituents in the examined municipal wastewaters with typical LAS and NPnEO concentrations of 2-10 mg/L and 0.1-0.5 mg/L, respectively. The removal of aromatic surfactants in conventional STP showed well-known features reported in the literature, including an efficient microbial transformation of the parent molecules and formation of stable metabolic products. The elimination efficiency of aromatic surfactants using the MBR unit was higher than that in the conventional STP, while the composition of recalcitrant nonylphenolic residues in the effluent seems to be ecotoxicologically more favourable due to the lower contributions of the lipophilic metabolites.

No abstract

No abstract

No abstract

No abstract

SummaryThe aim of this study is to determine the adsorption performance of three types of adsorbents for removal of As(V) from water: Bayoxide ® E33 (granular iron(III) oxide), Titansorb ® (granular titanium oxide) and a suspension of precipitated iron(III) hydroxide. Results of As(V) adsorption stoichiometry of two commercial adsorbents and precipitated iron(III) hydroxide in tap and demineralized water were fi tt ed to Freundlich and Langmuir adsorption isotherm equations, from which adsorption constants and adsorption capacity were calculated. The separation factor R L for the three adsorbents ranged from 0.04 to 0.61, indicating eff ective adsorption. Precipitated iron(III) hydroxide had the greatest, while Titansorb had the lowest capacity to adsorb As(V). Comparison of adsorption from tap or demineralized water showed that Bayoxide and precipitated iron(III) hydroxide had higher adsorption capacity in demineralized water, whereas Titansorb showed a slightly higher capacity in tap water. These results provide mechanistic insights into how commonly used adsorbents remove As(V) from water.