Abstract. In Italy infills and partitions (non-structural elements) are typically made up of hollow brick masonry, disposed in one or two parallel vertical walls. Many studies have analysed their role on the seismic behaviour of moment resisting framed RC buildings and many seismic codes, all over the world, have provided specific additional measures for them. \ud During the Abruzzo seismic sequence, non-structural damage in RC buildings, both private and public, was extensive, varying from small cracks to collapse, along with minor or no damage to structural elements. This damage involved a number of buildings, both old and recently completed, determining heavy socio-economic consequences, including human casualties, loss of building functionality (particularly important in case of strategic constructions), and unusable buildings. In this paper a review of the most frequent damage patterns is performed, aimed at identifying the main causes of damage and linking them to commonly adopted construction rules. For this purpose, local and global structural configurations frequently exhibiting non-structural damage are described, aside from out-of-plane and in-plane failures. Furthermore, a review of code provisions on non structural elements has been performed in the paper making reference to the most prominent current seismic codes and, finally, some design and construction rules are suggested
SUMMARYThe aim of this work is to estimate the fundamental translational frequencies and relative damping of a large number of existing buildings, performing ambient vibration measurements. The first part of the work is devoted to the comparison of the results obtained with microtremor measurements with those obtained from earthquake recordings using four different techniques: horizontal-to-vertical spectral ratio, standard spectral ratio, non-parametric damping analysis (NonPaDAn) and half bandwidth method. We recorded local earthquakes on a five floors reinforced concrete building with a pair of accelerometers located on the ground and on top floor, and then collected microtremors at the same location of the accelerometers. The agreement between the results obtained with microtremors and earthquakes has encouraged extending ambient noise measurements to a large number of buildings. We analysed the data with the abovementioned methods to obtain the two main translational frequencies in orthogonal directions and their relative damping for 80 buildings in the urban areas of Potenza and Senigallia (Italy). The frequencies determined with different techniques are in good agreement. We do not have the same satisfactory results for the estimates of damping: the NonPaDAn provides estimates that are less dispersed and grouped around values that appear to be more realistic. Finally, we have compared the measured frequencies with other experimental results and theoretical models. Our results confirm, as reported by previous authors, that the theoretical period-height relationships overestimate the experimental data.
During the 2002 seismic sequence in Molise (Italy), the town of Bonefro suffered moderate damage (I MCS ס VII) except for two reinforced concrete (RC) buildings. These buildings are located on soft sediments, close to each other and very similar in design and construction. The main difference is the height: the most damaged one (European Macroseismic Scale damage 4) has four stories, whereas the less damaged (EMS damage 2) has three stories. The M 5.4 shock on 31 October damaged both of them. The second shock on 1 November (M 5.3) increased the damage on the four-story building substantially, just while a 5-min. seismic recording was taken. We analyzed the recorded data by four different techniques: short-time fourier transform (STFT), wavelet transform (WT), horizontal-to vertical spectral ratio (HVSR), and horizontal-to-vertical moving window ratio (HVMWR). All the results agree upon the estimate of the main building frequency before the second shock and upon the shift of frequency due to damage. All the fundamental frequencies (pre-, during, and postdamage) are in the range 2.5-1.25 Hz. The fundamental frequency of the less damaged building was estimated at about 4 Hz.To test if the soil-building resonance effect could have increased the damage, we also evaluated the soil fundamental frequency by three different techniques: noise HVSR, strong motion HVSR of seven aftershocks, and 1D modeling based on a velocity profile derived from noise analysis of surface waves (NASW) measurements. The results are again in good agreement, showing that resonance frequencies of the soil and of the more damaged building are very close.
In this paper earthquake damage scenarios for residential buildings (about 4200 units) in Potenza (Southern Italy) have been estimated adopting a novel probabilistic approach that involves complex source models, site effects, building vulnerability assessment and damage estimation through Damage Probability Matrices. Several causative faults of single seismic events, with magnitude up to 7, are known to be close to the town. A seismic hazard approach based on finite faults ground motion simulation techniques has been used to identify the sources producing the maximum expected ground motion at Potenza and to generate a set of ground motion time histories to be adopted for building damage scenarios. Additionally, site effects, evaluated in a previouswork through amplification factors of Housner intensity, have been combined with the bedrock values provided by hazard assessment. Furthermore, a new relationship between Housner and EMS-98 macroseismic intensity has been developed. This relationship has been used to convert the probability mass functions of Housner intensity obtained from synthetic seismograms amplified by the site effects coefficients into probability mass function of EMS-98 intensity. Finally, the Damage Probability Matrices have been applied to estimate the damage levels of the residential buildings located in the urban area of Potenza. The proposed methodology returns the full probabilistic distribution of expected damage, thus avoiding average damage index or uncertainties expressed in term of dispersion indexes
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.