Abstract. In Italy infills and partitions (non-structural elements) are typically made up of hollow brick masonry, disposed in one or two parallel vertical walls. Many studies have analysed their role on the seismic behaviour of moment resisting framed RC buildings and many seismic codes, all over the world, have provided specific additional measures for them. \ud
During the Abruzzo seismic sequence, non-structural damage in RC buildings, both private and public, was extensive, varying from small cracks to collapse, along with minor or no damage to structural elements. This damage involved a number of buildings, both old and recently completed, determining heavy socio-economic consequences, including human casualties, loss of building functionality (particularly important in case of strategic constructions), and unusable buildings. In this paper a review of the most frequent damage patterns is performed, aimed at identifying the main causes of damage and linking them to commonly adopted construction rules. For this purpose, local and global structural configurations frequently exhibiting non-structural damage are described, aside from out-of-plane and in-plane failures. Furthermore, a review of code provisions on non structural elements has been performed in the paper making reference to the most prominent current seismic codes and, finally, some design and construction rules are suggested
During the 2002 seismic sequence in Molise (Italy), the town of Bonefro suffered moderate damage (I MCS ס VII) except for two reinforced concrete (RC) buildings. These buildings are located on soft sediments, close to each other and very similar in design and construction. The main difference is the height: the most damaged one (European Macroseismic Scale damage 4) has four stories, whereas the less damaged (EMS damage 2) has three stories. The M 5.4 shock on 31 October damaged both of them. The second shock on 1 November (M 5.3) increased the damage on the four-story building substantially, just while a 5-min. seismic recording was taken. We analyzed the recorded data by four different techniques: short-time fourier transform (STFT), wavelet transform (WT), horizontal-to vertical spectral ratio (HVSR), and horizontal-to-vertical moving window ratio (HVMWR). All the results agree upon the estimate of the main building frequency before the second shock and upon the shift of frequency due to damage. All the fundamental frequencies (pre-, during, and postdamage) are in the range 2.5-1.25 Hz. The fundamental frequency of the less damaged building was estimated at about 4 Hz.To test if the soil-building resonance effect could have increased the damage, we also evaluated the soil fundamental frequency by three different techniques: noise HVSR, strong motion HVSR of seven aftershocks, and 1D modeling based on a velocity profile derived from noise analysis of surface waves (NASW) measurements. The results are again in good agreement, showing that resonance frequencies of the soil and of the more damaged building are very close.
In this paper earthquake damage scenarios for residential buildings (about 4200 units) in Potenza (Southern Italy) have been estimated adopting a novel probabilistic approach that involves complex source models, site effects, building vulnerability assessment and damage estimation through Damage Probability Matrices. Several causative faults of single seismic events, with magnitude up to 7, are known to be close to the town. A seismic hazard approach based on finite faults ground motion simulation techniques has been used to identify the sources producing the maximum expected ground motion at Potenza and to generate a set of ground motion time histories to be adopted for building damage scenarios. Additionally, site effects, evaluated in a previouswork through amplification factors of Housner intensity, have been combined with the bedrock values provided by hazard assessment. Furthermore, a new relationship between Housner and EMS-98 macroseismic intensity has been developed. This relationship has been used to convert the probability mass functions of Housner intensity obtained from synthetic seismograms amplified by the site effects coefficients into probability mass function of EMS-98 intensity. Finally, the Damage Probability Matrices have been applied to estimate the damage levels of the residential buildings located in the urban area of Potenza. The proposed methodology returns the full probabilistic distribution of expected damage, thus avoiding average damage index or uncertainties expressed in term of dispersion indexes
This paper deals with the period evaluation of Reinforced Concrete (RC) framed buildings in elastic, yield and severely damaged states. Firstly, period-height relationships either reported in the literature, or obtained from both numerical simulations (eigenvalue analyses) and experimental measurements (ambient vibration analyses) have been examined and compared. Structural types representing low-rise, mid-rise and high-rise RC buildings without earthquake resistant design, widely present in the Italian and European built environment, have been studied. Results have shown high differences between numerical and experimental period values. Period elongation (stiffness degradation) during and after strong ground shaking has been also examined based on results from experimental in situ and laboratory tests performed on some RC framed building structures which suffered moderate-heavy damage. Some comments on the relationship between damage level and period elongation are reported.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.