Model predictive control (MPC) has a number of desirable attributes which are difficult to achieve with classical converter control techniques. Unfortunately, the nature of power electronics imposes restriction to the method, as a result of the limited number of available converter states. This, combined with the spread spectrum nature of harmonics inherent with the strategy, complicates further design. This paper presents a method for removing this characteristic without compromising the desirable functionality of predictive control. The method, named modulated MPC, is applied to a two-level three-phase converter and compared with a number of similar approaches. Experimental results are used to support theoretical analysis and simulation studies

A note on versions:The version presented here may differ from the published version or from the version of record. If you wish to cite this item you are advised to consult the publisher's version. Please see the repository url above for details on accessing the published version and note that access may require a subscription.For more information, please contact eprints@nottingham.ac.uk

Abstract-More-electric aircraft (MEA) has become a dominant trend for modern aircraft. On-board MEA, many functions, which are conventionally driven by pneumatic and hydraulic power, are replaced with electrical subsystems. Starting aircraft engines with an electrical motor instead of using pneumatic power from the auxiliary power unit (APU) is one of the major characteristics of future aircraft. This paper presents the development of a novel electric starter-generator system for aircraft applications. The paper describes the main achievements of the project within the key areas including electric machines, power electronic converters, thermal management and overall system control design. The developed prototype has been tested successfully and the test results are presented in this paper.

Abstract-This paper presents innovative research towards the development of a 45 kW high speed switched reluctance drive as an alternative starter-generator for future aero-engines. To perform such a function the machine had to be designed with a very wide constant power-speed range. During enginestart/motoring mode, a peak torque demand of 54 Nm at 8 krpm was met, whilst in generating mode, 19.2-32 krpm, the machine was designed to deliver a constant power of 45 kW. The key enabling feature of the design lies in the novel rotor structure developed so as to allow for such a wide speed range. The results presented, are those measured during the initial testing phase and validate the system design and performance in the low-speed region with the machine operated in starting-mode. The measured machine power density is at 9.8 kW/ltr, whilst the global system efficiency is at 82%.

No abstract

No abstract

-This paper presents a novel Finite Control SetModel Predictive Control (FS-MPC) approach for gridconnected converters. The control performance of such converters may get largely affected by variations in the supply impedance, especially for systems with low Short Circuit Ratio (SCR) values. A novel idea for estimating the supply impedance variation, and hence the grid voltage, using an algorithm embedded in the MPC is presented in this paper. The estimation approach is based on the difference in grid voltage magnitudes at two consecutive sampling instants, calculated on the basis of supply currents and converter voltages directly within the MPC algorithm, achieving a fast estimation and integration between the controller and the impedance estimator. The proposed method has been verified, using simulation and experiments, on a 3-phase 2-level converter.

No abstract