INTRODUÇÃOO Estado do Pará é uma das regiões mais privilegiadas do planeta em termos de exploração de recursos minerais.Muitos dos projetos de mineração em andamento no Estado possuem destaque mundial por causa da qualidade do produto, mas também pela magnitude de suas jazidas e dos volumes de produção, o que faz com que as indústrias Caracterização dos resíduos cauliníticos das indústrias de mineração de caulim da amazônia como matéria-prima para produção de pozolanas de alta reatividade (Characterization of kaolin wastes from kaolin mining industry from the amazon region as raw material for pozzolan production)M. S. Barata, R. S. Angélica Instituto de Geociências, Universidade Federal do Pará, Belém, PA msb@amazon.com.br, angelica@ufpa.br ResumoAs regiões do Rio Capim e do Rio Jari são os principais distritos caulinitícos da Região Amazônica, detentores das maiores reservas brasileiras de caulim de alta qualidade para aplicações como cobertura de papel. O caulim é lavrado e beneficiado por três grandes companhias que são responsáveis pela geração de aproximadamente 500 mil de toneladas anuais de um resíduo decorrente da etapa de centrifugação. Esse resíduo, na forma de polpa, é depositado em lagoas de sedimentação que ocupam grandes extensões de áreas. O objetivo da pesquisa foi investigar as características físicas, químicas e mineralógicas dos resíduos processados da Região do Jari e do Capim, de modo a avaliar se atendem aos requisitos como matéria-prima para a produção de uma pozolana de alta reatividade, o metacaulim, adição mineral que incorporada ao cimento Portland proporciona alto desempenho às misturas de concreto e argamassas. Os resíduos foram caracterizados por difração de raios X, análise térmica, espectroscopia de infravermelho, microscopia eletrônica de varredura, fluorescência de raios X e difração a laser. Ambos os resíduos são constituídos por no mínimo 92% de caulinita de baixa granulometria, cujas áreas superficiais específicas são superiores a 8 m 2 /g e os diâmetros médios de partículas inferiores a 1 µm. Os teores de sílica livre (quartzo) não foram superiores a 3%. O alto grau de concentração de caulinita destes resíduos dispensa os rígidos parâmetros de controle de remoção de impurezas, normalmente empregados na produção deste tipo de pozolana. O caulim do Rio Jari, com quantidade de defeitos na estrutura cristalina superior ao da caulinita do Rio Capim, proporcinou maior grau de desidroxilação a uma temperatura mais baixa quando calcinado, indicando a possibilidade de redução de gastos com energia para a produção da adição mineral. Os resultados das análises foram convergentes e apontam ambos os caulins estudados como excelentes matérias-primas para a produção do metacaulim de alta reatividade. Palavras-chave: caulim, resíduo, cimento Portland, adição mineral, pozolana, metacaulim. Abstract Capim and Jari are the two most important kaolin mining districts of the Brazilian Amazon region. They encompass the major Brazilian reserves of high quality kaolin for the paper coating ind...
No nordeste do Brasil, existe a ocorrência de zeolitas sedimentares relacionadas a arenitos, descoberta nos anos 2000. Esses arenitos são constituídos de quartzo, zeolitas naturais (estilbita) e argilominerais (esmectita). Estudos preliminares constataram que esse arenito pode ser empregado como material pozolânico em sistemas à base de cimento Portland, desde que o material seja peneirado para remoção do quartzo e ativado termicamente, uma vez que a estilbita é zeolita de baixa atividade pozolânica. O objetivo geral desse trabalho foi determinar qual a fração granulométrica que proporciona a maior concentração de zeolita e esmectita e a temperatura de calcinação que acarreta a maior atividade pozolânica. No programa experimental, empregou-se o arenito zeolítico passante nas peneiras #200 e #325 e calcinado às temperaturas de 150ºC, 300ºC e 500ºC. A análise da caracterização mineralógica das amostras peneiradas foi realizada por difração de raios X, por análises termogravimétrica e termodiferencial. Para avaliação da reatividade, foram realizados ensaios mecânicos de atividade pozolânica em argamassas de cal hidratada e cimento Porltand. Os resultados mostraram que a amostra peneirada na peneira #200 foi a mais adequada porque apresentou elevada concentração de estilbita e um percentual maior de material passante em comparação a amostra da peneira #325, 15% e 2% respectivamente. A temperatura de calcinação de 500ºC foi a que proporcionou a maior atividade pozolânica, em razão da modificação mais efetiva da estrutura cristalina, tanto da estilbita, como da esmectita. As temperaturas mais moderadas a 150ºC e 300ºC não foram suficientes para a obtenção dos mesmos resultados. As argamassas com o arenito passante na peneira #200 e calcinado a 500ºC atingiram os valores limites mínimos exigidos para que um material seja considerado pozolânico, no caso, 6 MPa para argamassas de cal hidratada e 75% para o índice de atividade pozolânica (IAP).
As zeolitas possuem atividade pozolânica normalmente sem a necessidade de ativação térmica, por isto têm sido empregadas na produção de cimento e concreto hidráulicos desde a época do império romano. Hoje em dia são utilizadas na fabricação do cimento Portland através da substituição do clinquer em percentuais que variam entre 5 e 20%, dependendo da reatividade e da finura da zeólita. Em razão disto, são muito importantes do ponto de vista econômico e ambiental, principalmente quando não necessitam de tratamento térmico para adquirirem caráter pozolânico satisfatório, porque reduzem significativamente a energia de produção do clinquer e a liberação de CO2 proveniente tanto da descarbonatação da calcita como da combustão de combustíveis fósseis. Contudo, dados sobre reservas de zeólitas naturais são escassos e imprecisos. No Brasil, não existe conhecimento sobre depósitos naturais de zeólitas que possam ser explorados comercialmente. No nordeste do Brasil existe a ocorrência de zeolitas sedimentares relacionadas a arenitos descoberta nos anos 2000. Estes arenitos são constituídos de quartzo, argilominerais e zeolitas naturais (estilbita). O objetivo geral desse trabalho foi avaliar se esta zeólita natural presente no arenito possui atividade pozolânica satisfatória para ser empregada como adição mineral em cimentos Portland. No programa experimental o arenito zeolítico passou por beneficiamento através da remoção, por peneiramento, do quartzo e outros minerais inertes, de modo a concentrar a zeólita estilbita e com isto verificar as propriedades pozolânicas deste mineral. No estudo experimental foram empregadas as técnicas de difração de raios X, calorimetria, ensaios químicos e de determinação da atividade pozolânica em argamassas de cal hidratada e cimento Portland. Os resultados mostraram que o arenito zeolítico acelerou a hidratação do cimento Portland devido a extrema finura do material. O arenito apresentou atividade pozolânica, sendo a estilbita responsável por este comportamento. Entretanto, a reatividade foi ligeiramente inferior ao mínimo exigido para ser empregado em escala industrial como pozolana. Estudos complementares são necessários para averiguar se o tratamento térmico entre 300 °C e 500 °C pode aumentar a atividade pozolânica do arenito devido a destruição da estrutura cristalina tanto da estilbita quanto da esmectita presente no arenito.
O uso adequado de pozolanas possibilita a produção de cimentos especiais, de menor custo de fabricação e de maior durabilidade que os correspondentes sem adição. O emprego dessas adições minerais possibilita ganhos significativos em termos de produtividade e uma extensão da vida útil dos equipamentos de produção e da própria jazida de calcário, também ajudando na diminuição de CO2 lançado na atmosfera.As zeólitas têm sido utilizadas como material pozolânico em misturas com "terras vulcânicas" e água nas construções desde o tempo do antigo Império Romano. Nos dias atuais, existem muitas discussões envolvendo reatividade pozolânica das zeólitas naturais na incorporação dos cimentos Portland.Na Região nordeste do Brasil, zeólitas sedimentares relacionadas a arenitos da Bacia do Parnaíba foram descobertas pelo Serviço Geológico do Brasil nos anos 2000. Estes arenitos são constituídos em sua maioria de quartzo, zeólitas naturais (estilbita) e argilominerais (esmectita). Estudos preliminares constataram que este arenito pode ser empregado como material pozolânico em sistemas a base de cimento Portland, desde que o material seja peneirado para remoção do quartzo e ativado termicamente, uma vez que a estilbita é uma zeólita de baixa atividade pozolânica.O objetivo geral desse trabalho foi determinar qual proporção de arenito zeolítico ativado termicamente proporciona melhores propriedades mineralógicas e mecânicas ao cimento Portland.No programa experimental empregou-se o arenito zeolítico passante na peneira 200# e calcinado à temperatura de 500ºC. A análise química das amostras foi realizada por espectroscopia de fluorescência de raios-x e a caracterização mineralógica por difração de raios-x e análise termogravimétrica e termodiferencial. O comportamento da hidratação dos cimentos foi avaliado através de calorimetria de condução, difratometria de raio-X e análises termodiferencial e termogravimétricas. Para avaliação da atividade pozolânica foi adotado um ensaio mecânico de resistência à compressão em argamassas cimento Portland (CP I -S) e areia, com percentuais de substituição de cimento por arenito de 10, 20 e 30%.Os resultados mostraram que o arenito zeolítico calcinado com a percentual de substituição de 10% proporcionou às argamassas melhor resultado tem termos de resistência à compressão simples, contudo estudos mais aprofundados de durabilidade e a idades mais avançadas podem indicar que teores mais elevados do arenito zeolítico podem também ser apropriados para a produção de concretos, principalmente em obras de infraestrutura como barragens, canais, entre outras.
The state of Para is one of the greatest producers of mineral substances in Brazil. Kaolin for paper coating industry and bauxite for alumina and aluminium production are amongst the most important commodities. The latter is responsible for the generation of red mud, a well-known residue from Bayer process. The kaolin processing plants are also responsible for the generation of large amounts of wastes, in this case, very fine-grained kaolinite (white mud). The research aimed to find a final destination for such residues by developing new building materials. The proposed material is a pozzolanic pigment produced through calcination and grinding of mixtures of red mud and kaolin waste. The pozzolanic pigments provided increased mechanical strength and color stability of the colored mortars relative to the inert pigment. The pozzolanic characteristics of the pigments reduced the leaching of the mortars. The new material has proven to be promising in its application as an innovative construction material, with the possibility of using these residues in a market that is little explored in Brazilian civil construction: colored mortars and concrete.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.