Role of water in metal catalyst performance for ketone hydrogenation: a joint experimental and theoretical study on levulinic acid conversion into gamma-valerolactone

International audienceThe catalytic hydrogenation of levulinic acid (LA) with formic acid (FA) as a hydrogen source into [gamma]-valerolactone (GVL) is considered as one of the crucial sustainable processes in today's biorefinery schemes. In the current work, we investigated the modification of Ru/C as efficient catalysts for both formic acid decomposition and levulinic acid hydrogenation in comparison with Pd and Pt catalysts. In order to better understand what features are responsible for high catalytic performance, we combined experimental tests, DFT calculations together with extensive material characterization. In LA hydrogenation with FA as a hydrogen source, the intermediate surface formate inhibits at least partially the LA hydrogenation. In addition, the FA decomposition is highly sensitive to the kind of the preparation method of the Ru/C catalyst: (i) the process looks structure sensitive favored on larger particles and (ii) residual chlorine decreases significantly the FA decomposition rate

A series of titania-supported ruthenium and platinum catalysts was investigated in the levulinic acid hydrogenation towards γ-valerolactone, a key reaction for the catalytic transformation of biomass. It was shown that various morphologies and phases of titania strongly influence the physicochemical and catalytic properties of supported Ru and Pt catalysts in different ways. In the case of the catalyst supported on mixed TiO2 phases, Ru particles are exclusively located on the minority rutile crystallites, whereas such an effect was not observed for platinum. The platinum catalyst activity could be increased when the metal was dispersed on the large surface-area anatase, which was not the case for ruthenium as a result of its agglomeration on this support. The activity of ruthenium on anatase could be increased in two ways: a) when RuO2 formation during catalyst preparation was avoided; b) when pure anatase support material was modified so that it exhibited no microporosity. The obtained results allow a better understanding of the role of the support for Ru and Pt catalysts.

The surface Au–Ni nano-alloy was very efficiently used for the first time for the hydrogenation of levulinic acid with formic acid as an internal hydrogen source.