Poly(lactic acid)/graphene and poly(lactic acid)/carbon nanotube nanocomposites were prepared by an easy and low-cost method of melt blending of preliminary grinded poly(lactic acid) (PLA) with nanosized carbon fillers used as powder. Morphological, structural and mechanical properties were investigated to reveal the influence of carbon nanofiller on the PLA–based composite. The dependence of tensile strength on nanocomposite loading was defined by a series of experiments over extruded filaments using a universal mechanical testing instrument. The applying the XRD technique disclosed that compounds crystallinity significantly changed upon addition of multi walled carbon nanotubes. We demonstrated that Raman spectroscopy can be used as a quick and unambiguous method to determine the homogeneity of the nanocomposites in terms of carbon filler dispersion in a polymer matrix.

Decoration with silver nanoparticles was obtained by coating graphene with a polydopamine layer, able to induce spontaneous metallic nanoparticles formation without any specific chemical interfacial modifier, neither using complex instrumentation. The choice of dopamine was inspired by the composition of adhesive proteins in mussels, related to their robust attach to solid surfaces. The synthesis procedure started from graphite and involved eco-friendly compounds, such as Vitamin C and glucose as reducing agent and water as reaction medium. Silver decorated graphene was inserted as secondary nanofiller in the formulation of a reference conductive adhesive based on epoxy resin and silver flakes. A wide characterization of the intermediate materials obtained along the step procedure for the adhesive preparation was carried out by several techniques. We have found that the presence of nanofiller yields, in addition to an improvement of the thermal conductivity (up to 7.6 W/m · K), a dramatic enhancement of the electrical conductivity of the adhesive. In particular, starting from 3 · 102 S/cm of the reference adhesive, we obtained a value of 4 · 104 S/cm at a nanofiller concentration of 11.5 wt%. The combined double filler conductivity was evaluated by Zallen's model. The effect of the temperature on the resistivity of the adhesive has been also studied.

No abstract

No abstract

The industrial processing of tomato leads to substantial amounts of residues, typically known as tomato pomace or by-products, which can represent as much as 10% by weight of fresh tomatoes. At present, these residues are either used as feedstock for animals or, in the worst case, disposed of in landfills. This represents a significant waste because tomato pomace contains high-value compounds like lycopene, a powerful antioxidant, cutin, which can be used as a starting material for biopolymers, and pectin, a gelling agent. This article presents an overview of technologies that valorize tomato by-products by recovering added-value compounds as well as generating fuel for energy production. These technologies include operations for extraction, separation, and exploitation of lycopene, cutin and pectin, as well as the processes for conversion of the solid residues to fuels. Data collected from the review has been used to develop a biorefinery scheme with the related mass flow balance, for a scenario involving the tomato supply chain of Regione Campania in Italy, using tomato by-products as feedstock.