Electromagnetic and thermal properties of a non-conventional polymer nanocomposite based on thermoplastic Polylactic acid (PLA, Ingeo™) filled, in different weight percentage, with multi-walled carbon nanotubes (MWCNTs), graphene nanoplatelets (GNPs), as well as a mixture of both fillers (MWCNTs/GNPs), are analyzed. The combination of notable electrical, thermal, and electromagnetic (EM) properties of the carbon fillers, in concentrations above the percolation threshold, together with the good processability of the PLA matrix gives rise to innovative filaments for 3D printing. In particular, the shielding efficiency (SE) in the frequency range 26–37 GHz of samples increases from 0.20 dB of unfilled PLA up to 13.4 dB for composites containing MWCNTs and GNPs, corresponding to 4% and 95% of SE, respectively. The thermal conductivity of the PLA loaded with 12 wt % of GNPs is 263% higher than that of the unfilled polymer, whereas an improvement of about 99% and 190% is detected for the PLA matrix loaded with MWCNTs and both fillers, respectively. The EM and thermal characterization is combined with a morphological investigation allowing us to correlate the dispersion states of the fillers within the polymer matrix with the observed EM and thermal properties. The EM and thermal characteristics exhibited by the nanocomposites make them suitable for packaging applications of electronic devices with electromagnetic interference (EMI) shielding and thermal dissipation features.
Articles you may be interested inDesign of grid-type microwave absorbers with high-permittivity composites of Ag-coated Ni-Zn ferrite particles J. Appl. Phys. 117, 17A311 (2015) Microwave absorbing properties of hollow microspheres plated with magnetic metal films
Polystyrene composites with 0.5 wt. % loading of oriented multiwall carbon nanotubes (MWCNTs) have been produced by forge rolling method. The composites showed anisotropy of transmission and reflection of terahertz radiation depending on sample orientation relative to the polarization of electromagnetic wave. The structural characteristics of composites (nanotube ordering, length, defectiveness) were estimated by fitting the theoretical dependencies calculated within the Clausius-Mossotti formalism for cylindrical particles to the experimental data. The presented model was used for prediction of electromagnetic response of composites containing oriented MWCNTs with various structural parameters in THz region. V
We have used several methods to measure the effective complex permittivity of epoxy composites filled with carbonaceous (carbon black, single-walled carbon nanotube, and multi-walled carbon nanotube) over nine decades of frequency. The composite samples were fabricated by shear mixing. The spectral analysis of permittivity of these nanocomposites is in good agreement with Jonscher's modelling. We point out, taking these examples, that the experimental frequency dependence of the effective permittivity has a range of interesting properties. The likely transport mechanisms responsible for the dielectric relaxation in these samples can be modelled by the dipolar relaxation and anomalous low-frequency dispersion below and above percolation, respectively.
The electromagnetic properties of composite materials based on poly(lactic) acid (PLA) filled with graphite nanoplatelets (GNP) were investigated in the microwave (26-37 GHz) and terahertz (0.2-1 THz) frequency ranges. The maximum of the imaginary part of the dielectric permittivity was observed close to 0.6 THz for composites with 1.5 and 3 wt.% of GNP. The experimental data of complex dielectric permittivity of GNP/PLA composites was modelled using the MaxwellGarnett theory. The effects of fine dispersion, agglomeration, and percolation in GNPbased composites on its electromagnetic constitutive parameters, presence, and position of THz absorption peak are discussed on the basis of the modeling results and experimental data. The unique combination of conductive and geometrical parameters of GNP embedded into the PLA matrix below the percolation threshold allow us to obtain the THz absorptive material, which may be effectively used as a 3Dprinting filament.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.