Beam trawling causes physical disruption of the seabed through contact of the gear components with the sediment and the resuspension of sediment into the water column in the turbulent wake of the gear. To be able to measure and quantify these impacts is important so that gears of reduced impact can be developed. Here we assess the physical impact of both a conventional 4 m tickler-chain beam trawl and a “Delmeco” electric pulse beam trawl. We measure the changes in seabed bathymetry following the passage of these gears using a Kongsberg EM2040 multi-beam echosounder and use a LISST 100X particle size analyser to measure the concentration and particle size distribution of the sediment mobilized into the water column. We also estimate the penetration of the gears into the seabed using numerical models for the mechanical interaction between gears and seabed. Our results indicate that the seabed bathymetry changes between ∼1 and 2 cm and that it is further increased by higher trawling frequencies. Furthermore, our results suggest that the alteration following the passage of the conventional trawl is greater than that following the pulse trawl passage. There was no difference in the quantity of sediment mobilized in the wake of these two gears; however, the numerical model introduced in this study predicted that the tickler-chain trawl penetrates the seabed more deeply than the pulse gear. Hence, greater alteration to the seabed bathymetry by the tickler-chain beam trawling is likely to be a result of its greater penetration. The complimentary insights of the different techniques highlight the advantage of investigating multiple effects such as sediment penetration and resuspension simultaneously and using both field trials and numerical modelling approaches.

Tickler-chain SumWing and electrode-fitted PulseWing trawls were compared to assess seabed impacts. Multi-beam echo sounder (MBES) bathymetry confirmed that the SumWing trawl tracks were consistently and uniformly deepened to 1.5 cm depth in contrast to 0.7 cm following PulseWing trawling. MBES backscatter strength analysis showed that SumWing trawls (3.11 dB) flattened seabed roughness significantly more than PulseWing trawls (2.37 dB). Sediment Profile Imagery (SPI) showed that SumWing trawls (mean, SD) homogenised the sediment deeper (3.4 cm, 0.9 cm) and removed more of the oxidised layer than PulseWing trawls (1 cm, 0.8 cm). The reduced PulseWing trawling impacts allowed a faster re-establishment of the oxidised layer and micro-topography. Particle size analysis suggested that SumWing trawls injected finer particles into the deeper sediment layers (∼4 cm depth), while PulseWing trawling only caused coarsening of the top layers (winnowing effect). Total penetration depth (mean, SD) of the SumWing trawls (4.1 cm, 0.9 cm) and PulseWing trawls (1.8 cm, 0.8 cm) was estimated by the depth of the disturbance layer and the layer of mobilized sediment (SumWing = 0.7 cm; PulseWing trawl = 0.8 cm). PulseWing trawls reduced most of the mechanical seabed impacts compared to SumWing trawls for this substrate and area characteristics.

No abstract

The increased use of backscatter measurements in time series for environmental monitoring necessitates the comparability of individual results. With the current lack of pre-calibrated multibeam echosounder systems for absolute backscatter measurement, a pragmatic solution is the use of natural reference areas for ensuring regular assessment of the backscatter measurement repeatability. This method mainly relies on the assumption of a sufficiently stable reference area regarding its backscatter signature. The aptitude of a natural area to provide a stable and uniform backscatter response must be carefully considered and demonstrated by a sufficiently long time-series of measurements. Furthermore, this approach requires a strict control of the acquisition and processing parameters. If all these conditions are met, stability check and relative calibration of a system are possible by comparison with the averaged backscatter values for the area. Based on a common multibeam echosounder and sampling campaign completed by available bathymetric and backscatter time series, the suitability as a backscatter reference area of three different candidates was evaluated. Two among them, Carré Renard and Kwinte, prove to be excellent choices, while the third one, Western Solent, lacks sufficient data over time, but remains a valuable candidate. The case studies and the available backscatter data on these areas prove the applicability of this method. The expansion of the number of commonly used reference areas and the growth of the number of multibeam echosounder controlled thereon could greatly contribute to the further development of quantitative applications based on multibeam echosounder backscatter measurements.

No abstract

The late Palaeocene carbon isotope excursion (C.I.E.) is often regarded as the best means of correlating marine and continental deposits. The few isotopic studies carried out in continental environments were based on pedogenic carbonate [Koch et al., 1992], or on organic matter. Sinha [1997] took up this subject starting from the outcrops on the coast of the English Channel at Varangeville, where marine sequences biostratigraphically constrain the isotopic excursion. His work documents a negative delta 13 C org excursion value approximately -27 per mil PDB. The present work points out that it is necessary to study more complete sections than those studied by Sinha. A section named Phare d'Ailly has been sampled in detail (figs. 1, 2, 3). In this section, for which detailed analysis of sedimentology, palaeontology and organic matter facies establish the continental nature of the palaeoenvironment, isotopic analysis of organic matter reveals a very negative delta 13 C org excursion value approximately -30 per mil PDB. The P/E interval synthesized in figure 2 shows three main groups, the stratigraphy of which is strongly constrained between the calcareous nannofossil Zones NP8 and NP11. The marine Thanetian facies belong to Zones NP8 and NP9. Above, the "Sparnacian" (Mont Bernon Group) is divided into 5 units referred to as SP. Unit SP2 is attributed to the Peckichara disermas Charozone, equivalent to Zone NP9. For unit SP4, an indirect correlation with Zone NP10 may be deduced. The upper part of the Varangeville Formation is known for its nannofossil association attributed to Zone NP11. We may conclude from these observations that the sparnacian sediments are synchronous with NP9-10 Zones and that they are effectively located in the time interval of the delta 13 C excursion. The SP1 and SP2 sediments were analysed for carbonate content, grain size distribution, clay mineralogy and total organic content (T.O.C.), using standard laboratory methods (fig. 3). An optical specification of the organic matter has been obtained from semiquantitative analysis of the organic matter facies. The survey of macro- and microfossils has supplied complementary supports for isotopic analysis (seed, wood and charcoal). The isotopic measurements were carried out on the bulk sediment and on complementary supports with a mass spectrometer in continuous flow delta + (Finnigan Mat). The measurement precision is better than 0.1 per mil and the reproducibility is about 0.15 per mil. Washing residues provide Gasteropoda, Bivalvia, Ostracoda, Characea, as well as fruits and seeds, microcodiums and otolith. All the palaeontological data illustrate a continental biota of a pure lacustrine environment, quiet and shallow, in a hot and humid climate. The organic matter facies analysis confirms the absence of any marine influence and documents a palaeoenvironment of lakes and ponds having an anoxic floor. Thus the carbon of the organic matter is considered to be continental and their isotopic variations linked to those of the atmospheric carbon.

Three experiments were conducted in the Belgian part of the North Sea to investigate short-term variation in seafloor backscatter strength (BS) obtained with multibeam echosounders (MBES). Measurements were acquired on predominantly gravelly (offshore) and sandy and muddy (nearshore) areas. Kongsberg EM3002 and EM2040 dual MBES were used to carry out repeated 300-kHz backscatter measurements over tidal cycles (~13 h). Measurements were analysed in complement to an array of ground-truth variables on sediment and current nature and dynamics. Seafloor and water-column sampling was used, as well as benthic landers equipped with different oceanographic sensors. Both angular response (AR) and mosaicked BS were derived. Results point at the high stability of the seafloor BS in the gravelly area (<0.5 dB variability at 45° incidence) and significant variability in the sandy and muddy areas with envelopes of variability >2 dB and 4 dB at 45° respectively. The high-frequency backscatter sensitivity and short-term variability are interpreted and discussed in the light of the available ground-truth data for the three experiments. The envelopes of variability differed considerably between areas and were driven either by external sources (not related to the seafloor sediment), or by intrinsic seafloor properties (typically for dynamic nearshore areas) or by a combination of both. More specifically, within the gravelly areas with a clear water mass, seafloor BS measurements where unambiguous and related directly to the water-sediment interface. Within the sandy nearshore area, the BS was shown to be strongly affected by roughness polarization processes, particularly due to along- and cross-shore current dynamics, which were responsible for the geometric reorganization of the morpho-sedimentary features. In the muddy nearshore area, the BS fluctuation was jointly driven by high-concentrated mud suspension dynamics, together with surficial substrate changes, as well as by water turbidity, increasing the transmission losses. Altogether, this shows that end-users and surveyors need to consider the complexity of the environment since its dynamics may have severe repercussions on the interpretation of BS maps and change-detection applications. Furthermore, the experimental observations revealed the sensitivity of high-frequency BS values to an array of specific configurations of the natural water-sediment interface which are of interest for monitoring applications elsewhere. This encourages the routine acquisition of different and concurrent environmental data together with MBES survey data. In view of promising advances in MBES absolute calibration allowing more straightforward data comparison, further investigations of the drivers of BS variability and sensitivity are required.

No abstract