No abstract

ORTUÑO, Manuel, et al. "Optimization of a 1 mm thick PVA/acrylamide recording material to obtain holographic memories: method of preparation and holographic properties". Applied Physics B: Lasers and Optics. Vol. 76, No. 8 (July 2003 AbstractInformation holographic storage is a very promising technique due to its high theoretical capacity. One of the key factors in developing holographic memories is the need for a suitable recording material which must have certain specific characteristics. In particular, in order to achieve a high storage density it is necessary to work with great thicknesses. One of the essential requirements for holographic memories to be competitive is that the material must have a thickness of 500 µm or more, but it is not easy to find such thicknesses with the photopolymers currently available. In this study, we develop a method of preparing layers of a polyvinyl alcohol/acrylamide based photopolymer approximately 1 mm thick. Optimization of this material makes it possible to obtain good results for the main holographic parameters; diffraction efficiency 70% and energetic sensitivity 50 mJ/cm 2 .PACS numbers: 42.70.Ln; 42.40.Pa; 42.40.Ht ORTUÑO, Manuel, et al. "Optimization of a 1 mm thick PVA/acrylamide recording material to obtain holographic memories: method of preparation and holographic properties".

No abstract

Photopolymers that absorb in the visible spectrum are useful for different applications such as in the development of holographic memories, holographic optical elements or as holographic recording media. Photopolymers have an undesirable feature, the toxicity of their components and their low environmental compatibility, particularly if we analyse the life cycle of the devices made with these materials and their interaction with the environment. In this work we developed a new photopolymer with photochemical and holographic features similar to those of the standard material but with an improved design from the environmental point of view.

Abstract:One of the most interesting applications of photopolymers is as holographic recording materials for holographic memories. One of the basic requirements for this application is that the recording material thickness must be 500 µm or thicker. In recent years many 2-dimensional models have been proposed for the analysis of photopolymers. Good agreement between theoretical simulations and experimental results has been obtained for layers thinner than 200 µm. The attenuation of the light inside the material by Beer's law results in an attenuation of the index profile inside the material and in some cases the effective optical thickness of the material is lower than the physical thickness. This is an important and fundamental limitation in achieving high capacity holographic memories using photopolymers and cannot be analyzed using 2-D diffusion models. In this paper a model is proposed to describe the behavior of the photopolymers in 3-D. This model is applied to simulate the formation of profiles in depth for different photopolymer viscosities and different intensity attenuations inside the material.