The present study demonstrates the creation of a stable, superhydrophobic surface using the nanoscale roughness inherent in a vertically aligned carbon nanotube forest together with a thin, conformal hydrophobic poly(tetrafluoroethylene) (PTFE) coating on the surface of the nanotubes. Superhydrophobicity is achieved down to the microscopic level where essentially spherical, micrometer-sized water droplets can be suspended on top of the nanotube forest.
The tribological properties of solid lubricants such as graphite and the metal dichalcogenides MX2 (where M is molybdenum or tungsten and X is sulphur or selenium) are of technological interest for reducing wear in circumstances where liquid lubricants are impractical, such as in space technology, ultra-high vacuum or automotive transport. These materials are characterized by weak interatomic interactions (van der Waals forces) between their layered structures, allowing easy, low-strength shearing. Although these materials exhibit excellent friction and wear resistance and extended lifetime in vacuum, their tribological properties remain poor in the presence of humidity or oxygen, thereby limiting their technological applications in the Earth's atmosphere. But using MX2 in the form of isolated inorganic fullerene-like hollow nanoparticles similar to carbon fullerenes and nanotubes can improve its performance. Here we show that thin films of hollow MoS2 nanoparticles, deposited by a localized high-pressure arc discharge method, exhibit ultra-low friction (an order of magnitude lower than for sputtered MoS2 thin films) and wear in nitrogen and 45% humidity. We attribute this 'dry' behaviour in humid environments to the presence of curved S-Mo-S planes that prevent oxidation and preserve the layered structure.
The fabrication of carbon nanomaterials usually calls for expensive vacuum systems to generate plasmas and yields are disappointingly low. Here we describe a simple method for producing high-quality spherical carbon nano-'onions' in large quantities without the use of vacuum equipment. The nanoparticles, which have C60 cores surrounded by onion-like nested particles, are generated by an arc discharge between two graphite electrodes submerged in water. This technique is economical and environmentally benign, and produces uncontaminated nanoparticles which may be useful in many applications.
Chemical vapour deposition (CVD) is a powerful technology for producing high-quality solid thin films and coatings. While widely used in modern industries, it is continuously being developed as it is adapted to new materials. Today, CVD synthesis is being pushed to new heights with the precise manufacturing of both inorganic thin films of two-dimensional (2D) materials and high-purity polymeric thin films that can be conformally deposited on various substrates. In this Primer, an overview of the CVD technique including instrument construction, process control, material characterization, and reproducibility issues is provided. By taking graphene, 2D transition metal dichalcogenides (TMDs) and polymeric thin films as typical examples, the best practices for experimentation involving substrate pre-treatment, hightemperature growth and post-growth processes are presented. Recent advances and scaling-up challenges are also highlighted. By analyzing current limitations and optimizations, we also provide insight into possible future directions for the method, including reactor design for highthroughput and low-temperature growth of thin films.
Owing to their large absorption cross-sections and high photoluminescence quantum yields, lead halide perovskite quantum dots (PQDs) are regarded as a promising candidate for various optoelectronics applications. However, easy degradation of PQDs in water and in a humid environment is a critical hindrance for applications. Here we develop a Pb-S bonding approach to synthesize water-resistant perovskite@silica nanodots keeping their emission in water for over six weeks. A two-photon whispering-gallery mode laser device made of these ultra-stable nanodots retain 80% of its initial emission quantum yield when immersed in water for 13 h, and a two-photon random laser based on the perovskite@silica nanodots powder could still operate after the nanodots were dispersed in water for up to 15 days. Our synthetic approach opens up an entirely new avenue for utilizing PQDs in aqueous environment, which will significantly broaden their applications not only in optoelectronics but also in bioimaging and biosensing.
We compare the field emission characteristics of dense (10 9 nanofibers/cm 2 ), sparse (10 7 nanofibers/cm 2 ), and patterned arrays (10 6 nanofibers/cm 2 ) of vertically aligned carbon nanofibers on silicon substrates. The carbon nanofibers were prepared using plasma-enhanced chemical vapor deposition of acetylene and ammonia gases in the presence of a nickel catalyst. We demonstrate how the density of carbon nanofibers can be varied by reducing the deposition yield through nickel interaction with a diffusion layer or by direct lithographic patterning of the nickel catalyst to precisely position each nanofiber. The patterned array of individual vertically aligned nanofibers had the most desirable field emission characteristics, highest apparent field enhancement factor, and emission site density.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.