In this report we introduce a novel approach for an inexpensive and disposable colorimetric paper sensor array for the detection and discrimination of five explosivestriacetone triperoxide (TATP), hexamethylene triperoxide diamine (HMTD), 4-amino-2-nitrophenol (4A2NP), nitrobenzene (NB), and picric acid (PA). The colorimetric sensor comprised a disposable paper array fabricated using a wax printer and three reagents (KI, creatinine, and aniline) that produced a unique color pattern for each explosive based on chemical interactions between the explosive species and the chemical reagents. The analytes were discriminated from one another as per the color change profiles, which were readily distinguishable after 15 min, using hierarchical clustering analysis (HCA) and principal component analysis (PCA); there were no misclassifications in any of the trials conducted. The colorimetric pattern values were extracted using a smartphone, custom-made software and a closed chamber to circumvent the illumination problems commonly found in other paper approach devices. A semi-quantitative analysis was performed and it was possible to use as low as 0.2 mg of explosives.

No abstract

No abstract

A simple and fast electrochemical method for quantitative analysis of picric acid explosive (nitro-explosive) based on its electrochemical reduction at copper surfaces is reported. To achieve a higher sample throughput, the electrochemical sensor was adapted in a flow injection system. Under optimal experimental conditions, the peak current response increases linearly with picric acid concentration over the range of 20-300 μmol L(-1). The repeatability of the electrode response in the flow injection analysis (FIA) configuration was evaluated as 3% (n=10), and the detection limit of the method was estimated to be 6.0 μmol L(-1) (S/N=3). The sample throughput under optimised conditions was estimated to be 550 samples h(-1). Peroxide explosives like triacetone triperoxide (TATP) and hexamethylene triperoxide diamine (HMTD) were tested as potential interfering substances for the proposed method, and no significant interference by these explosives was noticed. The proposed method has interesting analytical parameters, environmental applications, and low cost compared with other electroanalytical methods that have been reported for the quantification of picric acid. Additionally, the possibility to develop an in situ device for the detection of picric acid using a disposable sensor was evaluated.

Forensic chemistry is the application of analytical chemistry to forensic analysis and is today one of the hot topics in the scientific literature and this review discusses works published between 2013 and 2017 regarding portable or potentially portable analytical methods that can be used in different areas of forensic chemistry.

We report the fabrication of a voltammetric electronic tongue for the detection and discrimination of harmful substances intentionally added to milk to increase its shelf life or imitate protein content. The electronic tongue consisted of three working electrodes composed of platinum, gold, and copper. The measurement principles involved the extraction of information from cyclic voltammograms recorded in unadulterated and adulterated milk. The extracted data were analysed using principal component analysis and the contaminants were successfully differentiated from one another in a score plot. Electrochemical quartz crystal microbalance analysis was used to investigate the electrode response in order to understand the mechanism by which the tongue could discriminate between the samples. It was found that the electrochemical formation and dissolution of platinum and gold oxides, and the reduction of a copper-melamine ionic pair formed at the surface of the copper electrode were the main factors responsible for discrimination. In addition, the electronic tongue was capable of identifying adulterations in different types of milk (whole, skimmed, and semi-skimmed) and milk from different brands. The lowest concentration of adulterant that resulted in a good discrimination was 10.0, 4.16, and 0.95 mmol• L −1 for formaldehyde, urea, and melamine, respectively.

We present the development of an electrochemical biosensor based on modified glassy carbon (GC) electrodes using hydrogel-based molecularly imprinted polymers (MIPs) has been fabricated for protein detection. The coupling of pattern recognition techniques via principal component analysis (PCA) has resulted in unique protein fingerprints for corresponding protein templates, allowing for MIP-based protein profiling. Polyacrylamide MIPs for memory imprinting of bovine haemoglobin (BHb), equine myoglobin (EMb), cytochrome C (Cyt C), and bovine serum albumin (BSA), alongside a non-imprinted polymer (NIP) control, were spectrophotometrically, and electrochemically characterised using modified GC electrodes. Rebinding capacities (Q) were revealed to be higher for larger proteins (BHb and BSA, Q ≈ 4.5) while (EMb and Cyt C, Q ≈ 2.5). Electrochemical results show that due to the selective nature of MIPs, protein arrival at the electrode via diffusion is delayed, in comparison to a NIP, by attractive selective interactions with exposed MIP cavities. However, at lower concentrations such discriminations are difficult due to low levels of MIP rebinding. PCA loading plots revealed 5 variables responsible for the separation of the proteins; E, I, E, I, ΔI . Statistical symmetric measures of agreement using Cohen's kappa coefficient (κ) were revealed to be 63% for bare GC, 96% for NIP and 100% for MIP. Therefore, our results show that with the use of PCA such discriminations are achievable, also with the advantage of faster detection rates. The possibilities for this MIP technology once fully developed are vast, including uses in bio-sample clean-up or selective extraction, replacement of biological antibodies in immunoassays, as well as biosensors for medicine, food and the environment. © 2014 Elsevier B.V

No abstract