Flood inundation remains challenging to map, model, and forecast because it requires detailed representations of hydrologic and hydraulic processes. Recently, Continental‐Scale Flood Inundation Mapping (CFIM), an empirical approach with fewer data demands, has been suggested. This approach uses National Water Model forecast discharge with Height Above Nearest Drainage (HAND) calculated from a digital elevation model to approximate reach‐averaged hydraulic properties, estimate a synthetic rating curve, and map near real‐time flood inundation from stage. In 2017, rapid snowmelt resulted in a record flood on the Bear River in Utah, USA. In this study, we evaluated the CFIM method over the river section where this flooding occurred. We compared modeled flood inundation with the flood inundation observed in high‐resolution Planet RapidEye satellite imagery. Differences were attributed to discrepancies between observed and forecast discharges but also notably due to shortcomings in the derivation of HAND from National Elevation Dataset as implemented in CFIM, and possibly due to suboptimal hydraulic roughness parameter. Examining these differences highlights limitations in the HAND terrain analysis methodology. We present a set of improvements developed to overcome some limitations and advance CFIM outcomes. These include conditioning the topography using high‐resolution hydrography, dispersing nodes used to subdivide the river into reaches and catchments, and using a high‐resolution digital elevation model. We also suggest an approach to obtain a reach specific Manning's n from observed inundation and validated improvements for the flood of March 2019 in the Ocheyedan River, Iowa. The methods developed have the potential to improve CFIM.

Significant efforts have been made recently in the application of high-resolution remote sensing imagery (i.e., sub-meter) captured by unmanned aerial vehicles (UAVs) for precision agricultural applications for high-value crops such as wine grapes. However, at such high resolution, shadows will appear in the optical imagery effectively reducing the reflectance and emission signal received by imaging sensors. To date, research that evaluates procedures to identify the occurrence of shadows in imagery produced by UAVs is limited. In this study, the performance of four different shadow detection methods used in satellite imagery was evaluated for high-resolution UAV imagery collected over a California vineyard during the Grape Remote sensing Atmospheric Profile and Evapotranspiration eXperiment (GRAPEX) field campaigns. The performance of the shadow detection methods was compared and impacts of shadowed areas on the normalized difference vegetation index (NDVI) and estimated evapotranspiration (ET) using the Two-Source Energy Balance (TSEB) model are presented. The results indicated that two of the shadow detection methods, the supervised classification and index-based methods, had better performance than two other methods. Furthermore, assessment of shadowed pixels in the vine canopy led to significant differences in the calculated NDVI and ET in areas affected by shadows in the highresolution imagery. Shadows are shown to have the greatest impact on modeled soil heat flux, while net radiation and sensible heat flux are less affected. Shadows also have an impact on the modeled Bowen ratio (ratio of sensible to latent heat) which can be used as an indicator of vine stress level.

A novel tool is proposed that couples the nondominated sorting genetic algorithm (NSGAII) with support vector regression (SVR) and nonlinear programming (NLP) to optimize monthly operation rules for hydropower generation. The SVR-NSGAII is applied to calculate the optimized release for hydropower generation by minimizing (1) the error committed by the SVR in extracting the optimized operation rule, and (2) the number of input variables used as predictors (the parsimony feature) in a regression model. The SVR calculates the optimized reservoir release for hydropower generation based on input variables and parameters values that are found by the NSGAII. An evaluation of results obtained for the Karoon-4 reservoir of Iran indicates that the SVR-NSGAII is well suited to calculate the optimal hydropower reservoir operation rule in real time with approximately 90% accuracy.

Water resources in the Middle East region are becoming scarce, while millions of people already do not have access to adequate water for drinking and sanitary purposes. Water resources depletion has become a significant problem in this region that is likely to worsen. Current research by remote sensing analysis indicates a descending trend of water storage in the Middle East region, where agriculture plays a crucial role in socio-economic life. This study introduces an approach quantifying water depletion in the Middle Eastern countries, which are being challenged in the management of their water resources. Furthermore, this paper presents results of a survey assessing the status of water use and supply in Middle Eastern countries and outlines some potential remedies. Specifically, Iran's water use is evaluated and compared with its neighbors'. The water equivalent anomaly (WEA) and total water storage (TWS) depletion are two indexes of water scarcity calculated for Middle Eastern countries surveyed herein. Our analysis reveals that Lebanon, Syria, Iraq, and Iran are countries with very negative water scarcity indexes. These estimates prove that international cooperation is needed to manage available regional water resources and reverse depletion of natural water sources. It is demonstrated herein that virtual water trade can help remediate regional water shortage in Middle Eastern countries.

In recent years, the deployment of satellites and unmanned aerial vehicles (UAVs) has led to production of enormous amounts of data and to novel data processing and analysis techniques for monitoring crop conditions. One overlooked data source amid these efforts, however, is incorporation of 3D information derived from multi-spectral imagery and photogrammetry algorithms into crop monitoring algorithms. Few studies and algorithms have taken advantage of 3D UAV information in monitoring and assessment of plant conditions. In this study, different aspects of UAV point cloud information for enhancing remote sensing evapotranspiration (ET) models, particularly the Two-Source Energy Balance Model (TSEB), over a commercial vineyard located in California are presented. Toward this end, an innovative algorithm called Vegetation Structural-Spectral Information eXtraction Algorithm (VSSIXA) has been developed. This algorithm is able to accurately estimate height, volume, surface area, and projected surface area of the plant canopy solely based on point cloud information. In addition to biomass information, it can add multi-spectral UAV information to point clouds and provide spectral-structural canopy properties. The biomass information is used to assess its relationship with in situ Leaf Area Index (LAI), which is a crucial input for ET models. In addition, instead of using nominal field values of plant parameters, spatial information of fractional cover, canopy height, and canopy width are input to the TSEB model. Therefore, the two main objectives for incorporating point cloud information into remote sensing ET models for this study are to (1) evaluate the possible improvement in the estimation of LAI and biomass parameters from point cloud information in order to create robust LAI maps at the model resolution and (2) assess the sensitivity of the TSEB model to using average/nominal values versus spatially-distributed canopy fractional cover, height, and width information derived from point cloud data. The proposed algorithm is tested on imagery from the Utah State University AggieAir sUAS Program as part of the ARS-USDA GRAPEX Project (Grape Remote sensing Atmospheric Profile and Evapotranspiration Remote Sens. 2020, 12, 50 2 of 34 eXperiment) collected since 2014 over multiple vineyards located in California. The results indicate a robust relationship between in situ LAI measurements and estimated biomass parameters from the point cloud data, and improvement in the agreement between TSEB model output of ET with tower measurements when employing LAI and spatially-distributed canopy structure parameters derived from the point cloud data.Evapotranspiration (ET) is one of the key components in water and energy cycles, and its quantification is essential to increasing crop water use efficiency [1]. However, estimation of ET using physically-based models is not a straightforward process due to input requirements and model complexity [2]. The degree of complexity increases with non-homogeneous landscapes where both soil and ...