No abstract

In Egypt, water treatment consumes about 365 000 tons of aluminum sulfate and produces more than 100 million tons of sludge per year. The common disposal system of sludge in Egypt is to discharge it into natural waterways. Toxicity of aluminum, environmental regulations and costs of chemicals used in water treatment and sludge treatment processes led to an evaluation of coagulant recovery and subsequent reuse. The present work aimed at aluminum recovery from sludge of El-Shiekh Zayd water treatment plant (WTP) to produce aluminum sulfate coagulant. Sludge was characterized and the effect of five variables was tested and the process efficiency was evaluated at different operating conditions. Maximum recovery is 94.2% at acid concentration 1.5 N, sludge weight 5 g, mixing speed 60 rpm, temperature 60 °C and leaching time 40 min. Then optimum conditions were applied to get maximum recovery for aluminum sulfate and compared to commercial coagulant on raw water of El-Shiekh Zayd (WTP).

The water treatment industry consumes large quantities of coagulant and produces huge amounts of slurry. The cost of alum used in water treatment, stringent regulations and negative impacts of sludge disposal are the motive to do integrated research studies on the technical feasibility of aluminum coagulant recovery from sludge using acidification. This work studied the leaching of iron, manganese, and chromium as the most extracted metals with aluminum during sludge acidification; furthermore, these metals have a great impact on the recovered coagulants' efficiency and treated water quality. The sludge used was collected from El-Sheikh Zayd water treatment plant in Egypt, then dried and ground; afterward, the effect of acid concentration, sludge mass, temperature, mixing speed and mixing time was studied. In addition, it was noticeable that the efficiency of sulfuric acid in leaching iron, manganese and chromium is higher than that of hydrochloric acid. Also, higher leaching for the three metals was obtained in all the experiments using higher acid concentration, elevated temperature, and rotational speed. Finally, the leached metals in recovered aluminum coagulants will not limit its application to water and wastewater treatment, as their concentrations are still very low if compared with aluminum, even with the highest leaching efficiency.

Polycyclic aromatic hydrocarbons (PAHs) pose a constant threat to the environment and public health. There are numerous activities in the Greater Cairo area that emit and release significant amounts of PAHs. Concentrations of these PAHs are released into the air and mixed with surface water, limiting its use. In this study, 17 PAH compounds are mapped at eight sites along the Nile River and its tributaries in Greater Cairo. In addition, their removal efficiency is evaluated with the conventional treatment in eight water treatment plants. PAHs were analyzed using GC–MS from January to December 2018. Naphthalene, anthracene, fluorene, pyrene, and phenanthrene were detected. The total amount of PAHs in raw water was highest in Shamal Helwan (1,325±631 ng/l) and lowest in Mostorod (468±329 ng/l), and the removal ranged from 25 to 31%. Further research is needed to integrate other techniques to reduce PAHs using the conventional treatment, and more efforts should be made to reduce the presence and release of PAHs in raw water.

No abstract