Cardiovascular diseases are considered as one of the serious diseases that leads to the death of millions of people all over the world. Stent implantation has been approved as an easy and promising way to treat cardiovascular diseases. However, in-stent restenosis and thrombosis remain serious problems after stent implantation. It was demonstrated in a large body of previously published literature that endothelium impairment represents a major factor for restenosis. This discovery became the driving force for many studies trying to achieve an optimized methodology for accelerated re-endothelialization to prevent restenosis. Thus, in this review, we summarize the different methodologies opted to achieve re-endothelialization, such as, but not limited to, manipulation of surface chemistry and surface topography.
The sustained or controlled release of nitric oxide (NO) can be the most promising approach for the suppression or prevention of restenosis and thrombosis caused by stent implantation. The aim of this study is to investigate the feasibility in the potential use of layer-by-layer (LBL) coating with a NO donor-containing liposomes to control the release rate of NO from a metallic stent. Microscopic observation and surface characterizations of LBL-modified stents demonstrate successful LBL coating with liposomes on a stent. Release profiles of NO show that the release rate is sustained up to 5 d. In vitro cell study demonstrates that NO release significantly enhances endothelial cell proliferation, whereas it markedly inhibits smooth muscle cell proliferation. Finally, in vivo study conducted with a porcine coronary injury model proves the therapeutic efficacy of the NO-releasing stents coated by liposomal LBL technique, supported by improved results in luminal healing, inflammation, and neointimal thickening except thrombo-resistant effect. As a result, all these results demonstrate that highly optimized release rate and therapeutic dose of NO can be achieved by LBL coating and liposomal encapsulation, followed by significantly efficacious outcome in vivo.
Nitric oxide (NO) is crucial for body homeostasis at moderate levels, but cytotoxic at high levels, thus making it a potential candidate for anticancer therapies and antibacterial surface coatings. To date, NO use has been limited due to its very short half-life. Many strategies have been utilized in an attempt to control the half-life of NO, including (but not limited to) lipid-based carriers, due to their biocompatibility and versatility. Areas covered: In this review, we discuss the latest studies that aimed to control the release of NO via a variety of lipid-based delivery carriers, such as liposomes (echogenic and normal) and microbubbles. In addition, we discuss the different types of NO donors used to control and target the release of NO. Expert opinion: Achieving a NO releasing lipid-based systems to mimic the natural release rate of NO remains a challenging task. Many promising strategies are still to be tackled, such as NO release supported lipid bilayers using GPx mimicking catalysts instead of vesicles, or the use of lipophillic NO donors such as nitrooleate instead of the conventional hydrophilic NO donors. These new strategies may present us with better alternatives to the previously published systems.
Engineering an endothelium-mimetic surface has been one of long-lasting topics to develop ideal cardiovascular devices. The aim of the study was to investigate the potential use of a model of lipid bilayers that not only come from membranes extracted from endothelial cells (ECs) but also embedded with a type of organoselenium lipid enabling it to catalyze the generation of nitric oxide (NO). Herein, the titanium-cloaking in lipid bilayers extracted from ECs was prepared to propose a promising idea for the development of endovascular implants. For this purpose, we synthesized and characterized a lipidic molecule containing selenium and verified enough catalytic activity for the NO generation in the presence of S-nitrosothiols (RSNO) as endogenous NO precursors. We demonstrated the fabrication process of tethered lipid bilayers, from membrane extraction to vesicle fusion, and validated the successful formation of the layer and the catalyst insertion. The resulting bilayer presented endothelium-similar properties including the NO generation and cellular interactions. The catalyst inserted into the bilayer provided an unexampled result in the release period and kinetics of NO, likely similar to the native endothelial system. Using three different cells including EC, smooth muscle cell (SMC), and macrophage, it was demonstrated that the membrane responds selectively to each cell in the manner of promotive, suppressive, and nonimmunoreactive, respectively. Taken together, the fundamental study on obtained results not only provides understanding of the kinetics of designed NO catalyst and cellular interactions of reassembled membranes but also suggests very useful data on rational design and development of many vascular implantable devices, even expandable toward to nonvascular biointerfacing devices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.