A microscale membrane-less biofuel cell, capable of generating electrical energy from human lachrymal liquid, was developed by utilizing the ascorbate and oxygen naturally present in tears as fuel and oxidant. The biodevice is based on three-dimensional nanostructured gold electrodes covered with abiotic (conductive organic complex) and biological (redox enzyme) materials functioning as efficient anodic and cathodic catalysts, respectively. Three-dimensional nanostructured electrodes were fabricated by modifying 100 μm gold wires with 17 nm gold nanoparticles, which were further modified with tetrathiafulvalene-tetracyanoquinodimethane conducting complex to create the anode and with Myrothecium verrucaria bilirubin oxidase to create the biocathode. When operated in human tears, the biodevice exhibited the following characteristics: an open circuit voltage of 0.54 V, a maximal power density of 3.1 μW cm(-2) at 0.25 V and 0.72 μW cm(-2) at 0.4 V, with a stable current density output of over 0.55 μA cm(-2) at 0.4 V for 6 h of continuous operation. These findings support our proposition that an ascorbate/oxygen biofuel cell could be a suitable power source for glucose-sensing contact lenses to be used for continuous health monitoring by diabetes patients.
High-redox potential laccases are powerful biocatalysts with a wide range of applications in biotechnology. We have converted a thermostable laccase from a white-rot fungus into a blood tolerant laccase. Adapting the fitness of this laccase to the specific composition of human blood (above neutral pH, high chloride concentration) required several generations of directed evolution in a surrogate complex blood medium. Our evolved laccase was tested in both human plasma and blood, displaying catalytic activity while retaining a high redox potential at the T1 copper site. Mutations introduced in the second coordination sphere of the T1 site shifted the pH activity profile and drastically reduced the inhibitory effect of chloride. This proof of concept that laccases can be adapted to function in extreme conditions opens an array of opportunities for implantable nanobiodevices, chemical syntheses, and detoxification.
The catalytic cycle of multicopper oxidases (MCOs) involves intramolecular electron transfer (IET) from the Cu‐T1 copper ion, which is the primary site of the one‐electron oxidations of the substrate, to the trinuclear copper cluster (TNC), which is the site of the four‐electron reduction of dioxygen to water. In this study we report a detailed characterization of the kinetic and electrochemical properties of bilirubin oxidase (BOx) – a member of the MCO family. The experimental results strongly indicate that under certain conditions, e.g. in alkaline solutions, the IET can be the rate‐limiting step in the BOx catalytic cycle. The data also suggest that one of the catalytically relevant intermediates (most likely characterized by an intermediate oxidation state of the TNC) formed during the catalytic cycle of BOx has a redox potential close to 0.4 V, indicating an uphill IET process from the T1 copper site (0.7 V) to the Cu‐T23. These suggestions are supported by calculations of the IET rate, based on the experimentally observed Gibbs free energy change and theoretical estimates of reorganization energy obtained by combined quantum and molecular mechanical (QM/MM) calculations.
Interdisciplinary research has combined the efforts of many scientists and engineers to gain an understanding of biotic and abiotic electrochemical processes, materials properties, biomedical, and engineering approaches for the development of alternative power-generating and/or energy-harvesting devices, aiming to solve health-related issues and to improve the quality of human life. This review intends to recapitulate the principles of biofuel cell development and the progress over the years, thanks to the contribution of cross-disciplinary researchers that have combined knowledge and innovative ideas to the field. The emergence of biofuel cells, as a response to the demand of electrical power devices that can operate under physiological conditions, are reviewed. Implantable biofuel cells operating inside living organisms have been envisioned for over fifty years, but few reports of implanted devices have existed up until very recently. The very first report of an implanted biofuel cell (implanted in a grape) was published only in 2003 by Adam Heller and his coworkers. This work was a result of earlier scientific efforts of this group to "wire" enzymes to the electrode surface. The last couple of years have, however, seen a multitude of biofuel cells being implanted and operating in different living organisms, including mammals. Herein, the evolution of the biofuel concept, the understanding and employment of catalyst and biocatalyst processes to mimic biological processes, are explored. These potentially green technology biodevices are designed to be applied for biomedical applications to power nano- and microelectronic devices, drug delivery systems, biosensors, and many more.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.