Fe-based catalysts based on ricobendazole and niclosamide showed higher performance compared to Pt (20–25%) and AC (90–99%) and more durability in long terms operations.

We report the synthesis and characterization of a new DNA-templated gold nanocluster (AuNC) of ∼1 nm in diameter and possessing ∼7 Au atoms. When integrated with bilirubin oxidase (BOD) and single walled carbon nanotubes (SWNTs), the AuNC acts as an enhancer of electron transfer (ET) and lowers the overpotential of electrocatalytic oxygen reduction reaction (ORR) by ∼15 mV as compared to the enzyme alone. In addition, the presence of AuNC causes significant enhancements in the electrocatalytic current densities at the electrode. Control experiments show that such enhancement of ORR by the AuNC is specific to nanoclusters and not to plasmonic gold particles. Rotating ring disk electrode (RRDE) measurements confirm 4e(-) reduction of O2 to H2O with minimal production of H2O2, suggesting that the presence of AuNC does not perturb the mechanism of ORR catalyzed by the enzyme. This unique role of the AuNC as enhancer of ET at the enzyme-electrode interface makes it a potential candidate for the development of cathodes in enzymatic fuel cells, which often suffer from poor electronic communication between the electrode surface and the enzyme active site. Finally, the AuNC displays phosphorescence with large Stokes shift and microsecond lifetime.

For the first time, a new generation of innovative non-platinum group metal catalysts based on iron and aminoantipyrine as precursor (Fe-AAPyr) has been utilized in a membraneless single-chamber microbial fuel cell (SCMFC) running on wastewater. Fe-AAPyr was used as an oxygen reduction catalyst in a passive gas-diffusion cathode and implemented in SCMFC design. This catalyst demonstrated better performance than platinum (Pt) during screening in “clean” conditions (PBS), and no degradation in performance during the operation in wastewater. The maximum power density generated by the SCMFC with Fe-AAPyr was 167 ± 6 μW cm−2 and remained stable over 16 days, while SCMFC with Pt decreased to 113 ± 4 μW cm−2 by day 13, achieving similar values of an activated carbon based cathode. The presence of S2− and showed insignificant decrease of ORR activity for the Fe-AAPyr. The reported results clearly demonstrate that Fe-AAPyr can be utilized in MFCs under the harsh conditions of wastewater.

Non-Pt-group metal (non-PGM) materials based on transition metal-nitrogen-carbon (M-N-C) and derived from iron salt and aminoantipyrine (Fe-AAPyr) of mebendazole (Fe-MBZ) were studied for the first time as cathode catalysts in double-chamber microbial fuel cells (DCMFCs). The pH value of the cathode chamber was varied from 6 to 11 to elucidate the activity of those catalysts in acidic to basic conditions. The Fe-AAPyr- and Fe-MBZ-based cathodes were compared to a Pt-based cathode used as a baseline. Pt cathodes performed better at pH 6-7.5 and had similar performances at pH 9 and a substantially lower performance at pH 11 at which Fe-AAPyr and Fe-MBZ demonstrated their best electrocatalytic activity. The power density achieved with Pt constantly decreased from 94-99 μW cm(-2) at pH 6 to 55-57 μW cm(-2) at pH 11. In contrast, the power densities of DCMFs using Fe-AAPyr and Fe-MBZ were 61-68 μW cm(-2) at pH 6, decreased to 51-58 μW cm(-2) at pH 7.5, increased to 65-75 μW cm(-2) at pH 9, and the highest power density was achieved at pH 11 (68-80 μW cm(-2) ). Non-PGM cathode catalysts can be manufactured at the fraction of the cost of the Pt-based ones. The higher performance and lower cost indicates that non-PGM catalysts may be a viable materials choice in large-scale microbial fuel cells.