Background: The product of a novel cytokine-responsive gene discovered by differential display analysis in our earlier studies on HepG2 cells was identified as mimitin -a small mitochondrial protein. Since proinflammatory cytokines are known to affect components of the respiratory chain in mitochondria, and mimitin was reported as a possible chaperone for assembly of mitochondrial complex I, we looked for the effects of modulation of mimitin expression and for mimitin-binding partners.
Sorption capacities of low-moor peats and Neogene clays from the overburden of lignite beds in Central Poland for Cr(III) ions as chloride and metalorganic complex ions have been investigated. The binding mechanisms and sorption parameters were determined based on the Freundlich and Langmuir nonlinear sorption isotherms. The sorption capacities of studied materials for Cr(III) ions depended on their properties (porosity, average pore diameters, specific surface area and content of Fe hydroxyoxides) as well as charge of Cr(III) ions, functional groups and their diagonal lengths. Cr(III) ions from chlorides were bound onto sorbents via Coulomb attraction and by Fe hydroxyoxides. However the complex Cr(III) ions were bound to the sorbent surface via hydrogen bonds between the dye -OH groups and =O of the sorbent functional groups. The equation parameters of sorption isotherms indicate cooperative heterogeneous adsorption at low Cr(III) concentrations and chemisorption at high Cr(III) concentrations.
The adsorption behavior of Cr(III) and Cr(VI) ions onto laboratory-synthesized 2-line ferrihydrite was investigated under a batch method as a function of initial chromium concentration (0.1–1000 mg L−1) and pH (3.0 and 5.0). Moreover, the effect of the type of anion (chloride and sulfate) on Cr(III) adsorption was studied. The affinity of Cr(III) ions for the ferrihydrite surface depended on both the type of anion and pH of the solution and the maximum adsorption capacities decreased as follows: q (SO42−, pH 5.0) > q (SO42−, pH 3.0) > q (Cl−, pH 5.0) > q (Cl−, pH 3.0), and were found to be 86.06 mg g−1, 83.59 mg g−1, 61.51 mg g−1 and 40.67 mg g−1, respectively. Cr(VI) ions were bound to ferrihydrite in higher amounts then Cr(III) ions and the maximum adsorption capacity increased as the pH of the solution decreased and was 53.14 mg g−1 at pH 5.0 and 83.73 mg g−1 at pH 3.0. The adsorption process of Cr species was pH dependent, and the ions were bound to the surface of ferrihydrite by surface complexation. The Sips isotherm was the best-fit model to the results obtained from among the four isotherm models used, i.e., Freundlich, Langmuir, Dubinin-Radushkevich and Sips, indicating different adsorption centers participate in Cr uptake. In order to assess the bonding strength of the adsorbed chromium ions the modified BCR procedure, dedicated to the samples with a high iron content, was used. The results of the sequential extraction showed that Cr(III) ions were bound mainly in the immobile residual fraction and Cr(VI) ions were bound in the reducible fraction. The presence of Fe (oxyhydr)oxides in soil and sediments increases their adsorption capacity for Cr, in particular for hexavalent Cr in an acid environment due to their properties (high pHPZC).
The aim of this study was to determine the adsorption capacity of the smectite clays (from the overburden of the lignite deposit in Belchatow) for two anionic dyes, i.e. Reactive Blue 81 (RB-81) and Direct Blue 74 (DB-74). Additionally, the infl uence of the thermal and chemical (acid and alkali) clay modifi cations on the amount of bonded dyes was investigated. The adsorption capacity of the clay (natural and modifi ed) was different for studied dyes and depended on the initial concentration and modifi cation type. All the modifi ed clays adsorbed the dyes at pH>pH PZC as the negatively charged surfaces of their particles (in accordance with the formula: AOH ↔ AO -+ H + ) prevented the formation of electrostatic bonds between the anionic dyes and the clay surface. The dyes were mainly bound with the hydrogen bonds forming between the donor groups in the dyes and the acceptor groups (-SiO and -Al 2 OH) in the clays. The coeffi cients in the adsorption isotherms were estimated with the linear and non-linear regression. The linear regression method was found that the Freundlich and Dubinin-Radushkevich isotherms described the dye sorption much better than the Langmuir model. On the other hand, all three models described well the experimental data in the non-linear regression method. Furthermore, the 1/n value (<1) obtained from the Freundlich equation for all the dye-sorbent systems indicated the favorable sorption.
Abstract. The aim of the study was to determine the potential for the application of dust from steel plant as an effective sorbent for removing Cr(III) and Cr(VI) in the form of simple and complex ions -Acid Blue 193 dye from aqueous solutions. Three isotherms models were used to interpret the experimental results namely: Langmuir, Freundlich, and DubininRadushkevich. Estimated equations parameters allowed to determine the binding mechanism. Based on laboratory studies it was found that the dust was characterized by high sorption capacities for Cr ions and dye from the aqueous solution. The sorption capacity of the dust for Cr(III) and Cr(VI) ions depended on the degree of oxidation, pH of solution and kind of anion and changed in series: Cr(III)-Cl pH=5.0> Cr(III)-SO4 pH=5.0> Cr(III)-Cl pH=3.0> Cr(III)-SO4 pH=3.0> Cr(VI) pH=5.0> Cr(VI) pH=3.0. Dust was also characterized by a high maximum sorption capacity of dye at a range of 38.2 -91.7 mg/g, depending on the dose of dust. Based on the study it was found that dust from a steel plant, containing iron oxides, can be used as low-cost and effective sorbent to remove pollutions containing chromium ions, especially from acidic wastewater.
The present research evaluates the influence of modification of smectite clay (BC) on its adsorption capacity of anionic dyes from aqueous solutions. Thermal (BC 250), acidic (BC H2SO4), and alkaline (BC NaOH) modification of clay was carried out. The clays were characterized by X-ray powder diffraction, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy. Adsorption of dyes was investigated by batch experiments at room temperature (23 ± 2 °C), a wide range of initial dye concentrations (1–1000 mg/dm3), and an adsorbent dose of 50 g. All modifications increased the clay’s adsorption capacity for Reactive Red 198, in the order BC H2SO4 > BC NaOH > BC 250 > BC; it was 10.32, 5.06, 3.32, and 2.92 mg/g, respectively. Acid and thermal modification of the clay increased its adsorption capacity for Acid Red 18, in the series BC H2SO4 > BC 250 > BC > BC NaOH; it was 3.07, 2.66, 2.16, and 1.28 mg/g, respectively. The experimental data were analyzed by Freundlich, Langmuir, Dubinin–Radushkevich, and Sips isotherms, using nonlinear regression. The experimental data best fitted the Sips isotherm. Taking into account the structure of the adsorbent and adsorbates and the results obtained, it can be concluded that the dyes were probably bound through chemisorption, by forming hydrogen bonds between Si–OH and Al–OH groups in the clay and –NH, –NH2, and –OH groups in the dyes. From the results obtained, it can be concluded that smectite clay is a promising material for dye adsorption.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.