No abstract

No abstract

No abstract

The antibacterial activity of ZnO (0-15.53 mol%) based SiO2-CaO-P2O5-Na2O-CaF2 bioactive glass-ceramics synthesized by controlled crystallisation were studied against eight micro-organisms using modified Kirby Bauer method. The antibacterial activity of the specimens was statistically evaluated using one-way analysis of variance and P < 0.05 was used as the level of significance. In vitro dissolution tests were performed in stimulated body fluid for 48 h at 37 °C for different time intervals to correlate the dissolution behaviour of test samples with antibacterial effects. The results illustrate that specimen BZn15.53 having the highest concentration of ZnO (15.53 mol%) demonstrated the strongest effect against Staph.aureus, S. epidermidis, B. subtilis and K. pneumonia. The effectiveness of BZn15.53 in inhibiting bacteria was due to accumulation of Zn(+2) ions around the surface of the bacteria cell release that caused the death of the cell, besides the presence of hydroxyapatite phase was also responsible for damaging the cell membrane of bacteria.

No abstract

The mechanical properties of silicate glass-ceramics were evaluated based on the compressive strength tests. It was found that Ta 2 O 5 addition improved densification, refinement of the microstructure and toughening of the bodies. The maximum compressive strength of the bodies with 1 mol% Ta 2 O 5 was increased 3-fold (245.92 ±0.3 MPa) in comparison to undoped glass-ceramics which was measured to be 89.04 ±0.3 MPa, while for 3 mol% it became 4-fold (387.12 ±0.4 MPa) greater. The addition of Ta 2 O 5 stabilized the system by controlling the biodegradation of the glass-ceramics. It effectively depressed the apatite formation as by addition of 3 mol% Ta 2 O 5 no apatite layer was observed. It may be concluded from this study that mechanical and physical properties can be improved by the addition of Ta 2 O 5 , but at a cost of bioactivity. Still the optimized composition having Ta 2 O 5 1 mol% may provide appropriate strength of biomaterials for high load bearing applications.

No abstract

No abstract