The parameters of physical layer radio frame for 5th generation (5G) mobile cellular systems are expected to be flexibly configured to cope with diverse requirements of different scenarios and services. This paper presents a frame structure and design, which is specifically targeting Internet of Things (IoT) provision in 5G wireless communication systems. We design a suitable radio numerology to support the typical characteristics, that is, massive connection density and small and bursty packet transmissions with the constraint of low-cost and low complexity operation of IoT devices. We also elaborate on the design of parameters for random access channel enabling massive connection requests by IoT devices to support the required connection density. The proposed design is validated by link level simulation results to show that the proposed numerology can cope with transceiver imperfections and channel impairments. Furthermore, the results are also presented to show the impact of different values of guard band on system performance using different subcarrier spacing sizes for data and random access channels, which show the effectiveness of the selected waveform and guard bandwidth. Finally, we present system-level simulation results that validate the proposed design under realistic cell deployments and inter-cell interference conditions.INDEX TERMS 5G, frame structure, Internet of Things, random access channel.

Abstract-Flexibly supporting multiple services, each with different communication requirements and frame structure, has been identified as one of the most significant and promising characteristics of next generation and beyond wireless communication systems. However, integrating multiple frame structures with different subcarrier spacing in one radio carrier may result in significant inter-service-band-interference (ISBI). In this paper, a framework for multi-service (MS) systems is established based on subband filtered multi-carrier system. The subband filtering implementations and both asynchronous and generalized synchronous (GS) MS subband filtered multi-carrier (SFMC) systems have been proposed. Based on the GS-MS-SFMC system, the system model with ISBI is derived and a number of properties on ISBI are given. In addition, low-complexity ISBI cancelation algorithms are proposed by precoding the information symbols at the transmitter. For asynchronous MS-SFMC system in the presence of transceiver imperfections including carrier frequency offset, timing offset and phase noise, a complete analytical system model is established in terms of desired signal, intersymbol-interference, inter-carrier-interference, ISBI and noise. Thereafter, new channel equalization algorithms are proposed by considering the errors and imperfections. Numerical analysis shows that the analytical results match the simulation results, and the proposed ISBI cancelation and equalization algorithms can significantly improve the system performance in comparison with the existing algorithms.Index Terms-multi-service multi-carrier system, inter-serviceband-interference, universal filtered multi-carrier, subband filtered multi-carrier, transceiver imperfection, generalized synchronization

No abstract

No abstract

Abstract-Filtered orthogonal frequency division multiplexing (F-OFDM) system is a promising waveform for 5G and beyond to enable multi-service system and spectrum efficient network slicing. However, the performance for F-OFDM systems has not been systematically analyzed in literature. In this paper, we first establish a mathematical model for F-OFDM system and derive the conditions to achieve the interference-free one-tap channel equalization. In the practical cases (e.g., insufficient guard interval, asynchronous transmission, etc.), the analytical expressions for inter-symbol-interference (ISI), inter-carrier-interference (ICI) and adjacent-carrier-interference (ACI) are derived, where the last term is considered as one of the key factors for asynchronous transmissions. Based on the framework, an optimal power compensation matrix is derived to make all of the subcarriers having the same ergodic performance. Another key contribution of the paper is that we propose a multi-rate F-OFDM system to enable low complexity low cost communication scenarios such as narrow band Internet of Things (IoT), at the cost of generating intersubband-interference (ISubBI). Low computational complexity algorithms are proposed to cancel the ISubBI. The result shows that the derived analytical expressions match the simulation results, and the proposed ISubBI cancelation algorithms can significantly save the original F-OFDM complexity (up to 100 times) without significant performance loss.