Background
The loss of third-order information in pre-adjusted brackets due to torsional play is a problem in clinical orthodontics. The aim of this study was to evaluate the impact of slot height, archwire height, width and edge bevel’s radius on the torsional play for three brackets/archwire systems.
Methods
Ninety brackets with a 0.022 × 0.028 in. slot with McLaughlin-Bennett-Trevisi prescription from three different manufacturers were selected, and the slot’s height and depth were measured using a profile projector. Sixty stainless-steel rectangular archwires from three different manufacturers were sectioned and observed with a SEM to measure their height, width, and radius of edge bevel. The recorded data were used to calculate the theoretical torsional play between different slot−archwire combinations. One-way ANOVA was used to compare the measurements within different bracket types and among different manufacturers.
Results
Slot height was usually oversized. Archwire’s height was usually undersized, but oversized wires were also observed. The radius edge bevel was the most variable parameter. A certain degree of torsional play is always present that differs from one bracket type to another of the same producer and that can even be doubled from one manufacturer to another.
Conclusions
Due to production tolerance, differences between the nominal values and the real dimensions of any components of a slot/archwire system are common. This results in a torsional play that limits torque expression. The archwire’s edge bevel plays an important role in torque expression, and clearer information should be provided by the manufacturers regarding this aspect.
The aim of the present study was to evaluate how hydroabrasion performs during composite removal. A standardized amount of composite was bonded to 40 enamel surfaces of extracted third molars, then removed with either a tungsten carbide bur mounted on a micro-motor handpiece without irrigation, a tungsten carbide bur mounted on a micro-motor handpiece with irrigation, a tungsten carbide bur mounted on an air-rotor handpiece, or hydroabrasion. The four treatment methods were compared using the enamelsurface-index and the adhesive-remnant-index and performing a Kruskal-Wallis statistical test to detect differences between each method' scores. Hydroabrasion produced significantly less damage to the enamel surface compared to the other three methods. Hydroabrasion was the cleaning method that produced less damages to the enamel surface, at a cost of a less efficient composite removal than tungsten carbide burs on micro-motor handpiece.
Tooth transposition is a rare dental anomaly that often represents a challenge for the clinician. The case of a girl with skeletal Class III malocclusion and concomitant maxillary canine-first premolar bilateral transposition, followed from 7 to 17 years of age, is presented. After a first phase of treatment aimed at resolving the Class III malocclusion, the transposition was maintained and the case finalized with a multibracket appliance. (Angle Orthod. 2016;86:509-519.)
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.