Hybrid solar cells have been fabricated from solution processing of poly-(3-hexylthiophen-2,5-diyl) onto planar poly-crystalline thin film silicon (poly-Si) absorbers on glass. The poly-Si layers were prepared by laser crystallization. Methyl passivation of the poly-Si surface by a one-step grafting process via methyl-Grignard enabled open circuit voltages of up to 552 mV and an overall power conversion efficiency of 6.6% for this device type. The solar cell exhibited significant advantages compared to the wafer-based counterparts. The inverted device structure of the thin film cell lead to an enhancement of the quantum efficiency since the back side contacted cell had less light absorption and reflection losses due to the gold layer which was used as front contact for the c-Si-based hybrid solar cell. As a result, a photo current of 24.3 mA cm À2 was obtained for a 10 mm thin poly-Si layer on glass. Furthermore, the inverted device structure showed a pronounced increase in stability due to the much thicker gold back contact that reduces the diffusion of water and oxygen toward the polymer layer. After 3 months in ambient air, this type of solar cell operated with 86% of its initial efficiency.
The influence of ether groups in the side chain of spin coated regioregular polythiophene derivatives on the polymer layer formation and the hybrid solar cellproperties was investigated using electrical, optical, and X-ray diffraction experiments. The polymer layers are of high crystallinity but the polymer with 3 ether groups in the side chain (P3TOT) did not show any vibrational fine structure in the UV-Vis spectrum. The presence of ether groups in the side chains leads to better adhesion resulting in thinner and more homogeneous polymer layers. This, in turn, enhances the electronic properties of the planar c-Si/poly-thiophene hybrid solar cell. We find that the power conversion efficiency increases with the number of ether groups in the side chains, and a maximum power conversion efficiency of η = 9.6% is achieved even in simple planar structures
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.