This paper describes design concept, fabrication, and experimental results of a Persistent-Current Switch (PCS) for High Temperature Superconducting (HTS) magnets. Recently large-size HTS magnets have been fabricated with Ag-sheathed Bi2223 wires. Even in the case of HTS magnets, persistent-current mode has the advantage of maintaining a steady magnetic field for long periods. A PCS for an HTS magnet is a key component to realize persistent-current mode. A PCS for an HTS magnet must work at the same operating temperature as an HTS coil, and electrical resistivity for a PCS conductor should be sufficiently large to reduce the energy dissipation during charge and to shorten the switching time. To satisfy these requirements, a YBCO thin film is adopted for a PCS conductor. The PCS is used in a vacuum and conductively cooled by a cryocooler at around 20 K when the switch is "on". To change the PCS from "on" to "off", the temperature of the PCS is increased to around 100 K by electrical heaters. A new design concept of a PCS for an HTS magnet is introduced. And the test results of rated current operation, switching operation and persistent-current operation are shown.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.