No abstract

Immediate restoration of single tooth implants placed in fresh extraction sockets could be considered a valuable option to replace a missing tooth. The graft materials used in both groups have been found to be equally effective.

Within the limitations of the current study, flexural strength of the reinforced PMMA interim fixed dental prosthesis was significantly higher (P < 0.0001) when compared to the unreinforced PMMA interim fixed dental prosthesis. The use of silane treated unidirectional glass fibres is an effective method of reinforcing interim fixed restorations made of PMMA resins.

Loss of an eye can be caused by cancer, trauma, or congenital defects. A loss of eye creates functional, esthetic, and psychological lacunae in individual's personal and professional life. Rehabilitation of ocular defect can be done by a custom ocular prosthesis fabricated with heat cure polymethylmethacrylate. The custom-made prosthesis provides a better fit, is more comfortable to use and gives better cosmetic results than a stock prosthesis. The main objective of this article is to describe a new technique of customization using digital photograph of the patient's iris made using a digital camera to give excellent cosmetic results to the patient.

Methods: A total of 30 completely edentulous patients male or female, in the age group of 54e78 years (mean age 65 years), wearing conventional complete dentures were selected and randomly divided in to two groups. A total of 60 implants were placed in the interforaminal area of the mental symphysis (two implants per patients) in 30 patients. Two types of attachment systems namely Ball for group-A and Bar for group-B were used and immediate loading done.Implants were evaluated clinically and radiographically at baseline, 1 month, 3 months, 6 months and 9 months. All clinical and radiographic parameters were subjected to statistical analysis.Result: The implant survival rate for group-A (ball attachment) was 93.3% and implant survival rate for group-B (bar attachment) was 93.3%. The overall implant survival rate was not dependent on the attachment system. There was no significant difference in the crestal bone loss in mesial, and distal side in implants with respect to ball and bar attachment for different period of observation (F ¼ 0.25; P ¼ 0.910; F ¼ 0.07; P ¼ 0.992 respectively). m e d i c a l j o u r n a l a r m e d f o r c e s i n d i a 7 1 ( 2 0 1 5 ) S 3 4 6 eS 3 5 4

INTRODUCTIONRehabilitation of partially edentulous patients using fixed partial denture (FPD) is a well-established treatment protocol since many decades. These FPDs require a laboratory phase of fabrication that varies from days to weeks. A dimensionally stable, strong, and accurate interim restoration is an important component of this treatment modality. These interim restorations provide pulpal protection, positional stability, occlusal function, strength, and aesthetics.Polymethylmethacrylate (PMMA) is the most common material used to fabricate interim FPDs. This material lacks sufficient strength and hence various methods are being used for reinforcing it in the past like glass fibres, carbon fibres, kevlar fibres, polyethylene fibres, and stainless steel wire.1-4 To date, little information is available in the literature on fracture resistance of reinforced PMMA temporary crown and bridge materials. It is also not clear as to how the site of placement of fibre reinforcement, influences the fracture resistance of temporary crown and bridge materials. Therefore, this study was undertaken to evaluate the fracture resistance of interim FPDs using different types of fibre reinforcements and also to determine the most appropriate site of reinforcement of interim FPDs fabricated from PMMA. MATERIALS AND METHODThis study was designed in two stages. In the first stage various methods of reinforcement for interim FPDs made up of PMMA were evaluated. During the second stage, favourable sites of placement to strengthen the interim FPDs were evaluated. There were five groups of ten samples each namely the group 1 (unreinforced, control group), group 2 (glass fibrereinforced), group 3 (polyethylene fibre-reinforced), group 4 (glass and polyethylene mixed fibre) and group 5 (stainless steel reinforced).Samples were tested for fracture resistance in an Instron universal testing machine. The maximum load causing the initial fracture and fracture resistance were calculated. The mean and standard deviation for each group were determined. The data was analysed for differences using one way analysis of variance (ANOVA) (The Tukey's standardised range test) to An evaluation of fracture resistance of interim fixed partial denture fabricated using polymethylmethacrylate and reinforced by different fibres for its optimal placement: an in vitro study Col

Body abnormalities or defects that compromise form, function and esthetics are sufficient to render an individual incapable of leading a normal life. Maxillofacial disfigurement can be the result of a congenital anomaly, trauma or tumour surgery. Multiple times due to size, location of the defect or because of patient's medical condition surgical reconstruction may not be possible so prosthetic rehabilitation is indicated in these cases. But the success of prosthetic rehabilitation is largely determined by the physical and mechanical properties of the material used. Materials commonly used these days for fabrication of facial prostheses are acrylic resins, acrylic copolymers, vinyl polymers, polyurethane elastomers and silicone elastomers. There has always been a quest for a maxillofacial prosthetic material that closely matches the defect tissues in appearance and properties. This article focuses on historical background, changing trends and future aspects of various materials used in rehabilitation of maxillofacial defects with their limitations and modifications.

Cranial vault defects may be acquired or congenital in origin. Rehabilitation of these patients often poses challenge to the operating team and prosthodontist. Polymethylmethacrylate is a commonly used alloplastic graft material which is used for the fabrication of cranial prosthesis. Nowadays, with the advancement in the bioengineering, custom-made template and cranial prosthesis can be made by rapid prototyping technology (RPT) by patient three-dimensional (3D) computed tomography (CT) scan images. This series of two cases explained two different techniques for the rehabilitation of the patient with frontotemporoparietal cranial defect. Case 1 had a history of cerebrovascular accident, followed by decompression craniotomy which led to frontotemporoparietal defect of the left side. This defect area was associated with the cerebrospinal fluid accumulation which made delineation of underlying bony margins difficult and interfered with conventional impression procedures. Case 2 had a road traffic accident which led to intracerebral hemorrhage followed by decompression craniotomy which resulted in frontotemporoparietal defect of the right side. The patient had a poor neuromuscular control which impedes with the upright posture of the head during impression making of the defect area. Therefore, these cases were planned to rehabilitate by RPT. In these techniques, the prosthesis was made using custom-made skull template produced by RPT, using the data of 3D-CT scan images. This technique resulted in the prosthesis with good esthetics and better fit of the prosthesis. The contours of the prosthesis were replicated in the same manner as compared to the contralateral side. RPT is an additive manufacturing technology which is now used in the field of dentistry too. This technique is easy to use; fabricate prosthesis with high precision is less time-consuming and has fewer chances of error.