This paper presents the findings of research conducted concerning the determination of thermal boundary conditions for the steel continuous casting process within the primary cooling zone. A cast slab -with dimensions of 1100 mm×220 mmwas analysed, and models described in references were compared with the authors' model. The presented models were verified on the basis of an industrial database. The research problem was solved with the finite element method using the ProCAST software package.Keywords: continuous casting of steel, heat transfer coefficient, numerical modelling, ProCAST W pracy przedstawiono wyniki badań dotyczących wyznaczenia termicznych warunków brzegowych dla procesu ciągłego odlewania stali w obszarze strefy pierwotnego chłodzenia. Analizie poddano wlewek płaski o wymiarach 1100×220 mm. W obliczeniach porównano modele opisane w literaturze wraz z modelem własnym. Zaprezentowane modele zweryfikowano na podstawie przemysłowej bazy danych. Zadanie zostało rozwiązane metodą elementów skończonych z zastosowaniem pakietu oprogramowania ProCAST.
The results of investigations relating the determination of thermal boundary conditions for continuous casting of steel were presented in the paper. The slab of dimensions 1100 mm x 220 mm was analyzed. In numerical calculations two models were compared. The first was the simple one and it used average heat transfer coefficient in both cooling zones. The second one used complex models in primary and secondary cooling zones. The presented models were verified on basing on an industrial data base. The problem was solved by the finite element method and the commercial numerical packet ProCAST.Keywords: continuous, casting of steel, boundary conditions, numerical modeling W pracy przedstawiono wyniki badań dotyczących wyznaczenia termicznych warunków brzegowych dla procesu ciągłego odlewania stali. Analizie poddano wlewek płaski o wymiarach 1100 mm × 220 mm. W obliczeniach porównano modele uproszczone, wykorzystujące średni współczynnik wymiany ciepła w strefie chłodzenia pierwotnego i wtórnego oraz modele rozbudowane. Zaprezentowane modele zweryfikowano na podstawie przemysłowej bazy danych. Zadanie zostało rozwiązane metodą elementów skończonych z zastosowaniem pakietu numerycznego ProCAST.
The paper presents an attempt of modelling liquid steel motion triggered off by electromagnetic stirring. Steel viscosity was calculated on the basis of temperature field determined with the use of stationary heat conduction equation. Velocity field was determined using Navier-Stokes equations and stream continuity equation. Solution was obtained using the finite element method. The developed model allows to carry out quick simulating calculations of fluid flow. Stationary solution was employed, and this allowed to reduce computation time substantially.Keywords: continuous casting, electromagnetic stirring, numerical modelling, finite elements method W pracy podjęto próbę modelowania ruchu ciekłej stali wywołanej mieszaniem elektromagnetycznym. Lepkość stali obliczano na podstawie pola temperatury wyznaczonego ze stacjonarnego równania przewodzenia ciepła. Pole prędkości wyznaczono korzystając z równań Naviera-Stokesa i równania ciągłości strugi. Rozwiązanie uzyskano metodą elementów skończonych. Opracowany model pozwala na wykonywanie szybkich obliczeń symulacyjnych ruchów ciekłej stali. Zastosowano rozwiązanie stacjonarne, co umożliwiło istotne skrócenie czasu obliczeń.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.