The results of investigations relating the determination of thermal boundary conditions for continuous casting of steel were presented in the paper. The slab of dimensions 1100 mm x 220 mm was analyzed. In numerical calculations two models were compared. The first was the simple one and it used average heat transfer coefficient in both cooling zones. The second one used complex models in primary and secondary cooling zones. The presented models were verified on basing on an industrial data base. The problem was solved by the finite element method and the commercial numerical packet ProCAST.Keywords: continuous, casting of steel, boundary conditions, numerical modeling W pracy przedstawiono wyniki badań dotyczących wyznaczenia termicznych warunków brzegowych dla procesu ciągłego odlewania stali. Analizie poddano wlewek płaski o wymiarach 1100 mm × 220 mm. W obliczeniach porównano modele uproszczone, wykorzystujące średni współczynnik wymiany ciepła w strefie chłodzenia pierwotnego i wtórnego oraz modele rozbudowane. Zaprezentowane modele zweryfikowano na podstawie przemysłowej bazy danych. Zadanie zostało rozwiązane metodą elementów skończonych z zastosowaniem pakietu numerycznego ProCAST.
In the paper a numerical model of heat and mass transfer in the mould zone in the steel continuous casting technology was presented. The model has been developed using ProCAST software designed for simulation of casting processes. It allows to determine temperature and stress distribution in continuous castings in order to optimize the most important process parameters. In this work calculations were executed for low carbon steel grades casted in the industry. In the simulations the real rheological properties measured in the experimental work and the boundary conditions determined on the basis of the industrial data were used.Keywords: continuous casting process, numerical simulation, rheological model W pracy przedstawiono numeryczny model przepływu ciepła i masy w strefie krystalizatora w procesie ciągłego odlewania stali. Model ten został opracowany z wykorzystaniem oprogramowania ProCAST przeznaczonego do symulacji procesów odlewniczych. Model ten może służyć do wyznaczenia rozkładu temperatury oraz naprężenia w ciągłym wlewku, co umożliwia optymalizację parametrów procesu. W pracy przeprowadzono symulacje dla stali niskowęglowych. W symulacji wykorzystano rzeczywiste właściwości reologiczne stali wyznaczone w pomiarach laboratoryjnych oraz warunki brzegowe określone na podstawie danych przemysłowych.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.