ResumoGrandes esforços têm sido empregados nas tentativas de substituição do cimento de aluminato de cálcio por outros tipos de agentes ligantes em concretos refratários. Adições superiores a 2-3% em peso desse ligante podem ser prejudiciais ao comportamento de secagem e a refratariedade em sistemas contendo microssílica. A literatura sugere como interessante alternativa a substituição desse agente ligante pelo sol de sílica, que proporciona, entre outras vantagens, uma maior velocidade de secagem e sinterização do concreto. Neste trabalho, comparou-se o desempenho do cimento aluminoso e do sol de sílica como agentes ligantes para concretos refratários. Os concretos foram avaliados quanto ao comportamento de mistura, secagem, resistência mecânica, permeabilidade, explosão, porosidade e refratariedade sob carga, em diferentes temperaturas e tempos de cura. Os resultados indicaram que o uso do sol de sílica pode apresentar vantagens com relação ao cimento refratário, porém para sua correta utilização novas pesquisas serão necessárias. Palavras-chave: concretos refratários, agente ligante, sol de sílica.
Abstract
Great efforts have been carried out in order to
Várias pesquisas têm sido dedicadas à área de novos agentes ligantes para concretos refratários visando a substituição do cimento de aluminato de cálcio (CAC). Embora seja um dos agentes ligantes mais utilizado, o CAC apresenta uma série de desvantagens, principalmente em relação à redução da refratariedade do sistema quando na presença de microssílica. Trabalhos publicados indicam o sol de sílica como importante alternativa, no entanto seu uso deve ser adaptado para concretos refratários. Desse modo, o objetivo do presente trabalho foi otimizar o uso do sol de sílica e verificar o efeito da adição de microssílica em sistemas com esse agente ligante. Foram realizados testes de secagem e medidas de resistência mecânica, porosidade, permeabilidade, refratariedade sob carga e fluência, variando-se o tempo de cura. Os resultados mostraram que o emprego da microssílica em sistemas com sol de sílica pode elevar a resistência mecânica sem comprometer a etapa de secagem. Researches have been devoted to new types of binder, aiming the replacement of the calcium aluminate cement (CAC) in refractory castables formulation. Although it is one of the most employed binders, CAC shows some drawbacks, mainly on the reduction of the system's refractoriness when microsilica is present. Recent publications suggest silica sol as a suitable alternative; nevertheless its use must be adapted to refractory castables. The purpose of this work was to optimize the use of silica sol and evaluate the microsilica effect on systems containing this sort of binder. Drying behavior, mechanical strength, porosity, permeability, refractoriness under load and creep were evaluated as a function of curing time. The results showed that the addition of microsilica to silica sol bonded castables can increase the mechanical strength without affecting the drying behavior
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.