New experimental data on the thermal conductivity of liquid water along the saturation line have been obtained recently, using the bare and coated transient hot wire technique, with high accuracy. The quality of the data is such that new standard reference values can be proposed with confidence limits of 0.7% at a 95% confidence level. These data and the correlation herein presented revise a previous correlation endorsed by IUPAC.

The available experimental liquid-phase thermal conductivity data for benzene have been examined with the intention of establishing a further liquid thermal conductivity standard along the saturation line. The quality of the available data is such that new standard reference values can be proposed with confidence limits better than + 1 % for most of the normalliquid range.-

Efficient design of industrial processes and equipment requires accurate thermal conductivity data for a variety of fluids, such as alternative refrigerants, fuels, petrochemicals, aqueous systems, molten salts, and molten metals. The accuracy of experimental thermal conductivity data is a function of the operating conditions of the instrument. Reference data are required over a wide range of conditions to verify the claimed uncertainties of absolute instruments and to calibrate relative instruments, since either type may be used to measure the thermal conductivity of fluids. Recently, accurate experimental data for the thermal conductivity of liquid toluene near the saturation line have been obtained, which allow the upper temperature limit of the previous reference-data correlation to be extended from 360 to 553 K. The thermal conductivity was measured using two transient hot-wire instruments from 300 to 550 K, the first with a bare 12.7 m platinum wire and the second using an anodized 25 m tantalum wire. Uncertainties due to the contribution of thermal radiation and the purity of the samples are discussed. The proposed value of the thermal conductivity of liquid toluene at 298.15 K and 0.1 MPa is 0.13 088Ϯ0.000 85. The quality of the data is such that new improved recommendations and recommended values can be proposed with uncertainties at 95% confidence of 1% for 189 ϽTϽ 440 K, 1.5% for 440 ϽTϽ 480 K, and 2% for 480 ϽTϽ 553 K, near the saturation line.

No abstract

No abstract