The LHC collimation upgrade foresees two additional collimators installed in the dispersion suppressor regions of points 2, 3 and 7. To obtain the necessary longitudinal space for the collimators, a solution based on an 11 T dipole as replacement of the 8.33 T LHC main dipoles is being considered. CERN and FNAL have started a joint development program to demonstrate the feasibility of Nb 3 Sn technology for this purpose. The program started with the development and test of a 2-m-long single-aperture demonstrator magnet. The goal of the second phase is the design and construction of a series of 2-m-long twin-aperture demonstrator magnets with a nominal field of 11 T at 11.85 kA current. This paper describes the electromagnetic design and gives a forecast of the field quality including saturation of the iron yoke and persistent-current effects in the Nb 3 Sn coils. The mechanical design concepts based on separate collared coils, assembled in a vertically split iron yoke are also discussed.

The upgrade of the LHC collimation system foresees installation of additional collimators around the LHC ring. The longitudinal space for the collimators could be provided by replacing some 8.33 T NbTi LHC main dipoles with shorter 11 T Nb 3 Sn dipoles compatible with the LHC lattice and main systems. To demonstrate this possibility, FNAL and CERN have started a joint program with the goal of building a 5.5 m long twin-aperture dipole prototype suitable for installation in the LHC. The first step of this program is the development of a 2 m long single-aperture demonstrator dipole with a nominal field of 11 T at the LHC nominal current of 11.85 kA and ∼20% margin. This paper describes the design, construction, and test results of the first single-aperture Nb 3 Sn demonstrator dipole model.

No abstract

The planned upgrade of the LHC collimation system includes additional collimators to be installed in the dispersion suppressor areas of points 2, 3 and 7. To provide the necessary longitudinal space for the collimators, a replacement of 8.33 T Nb-Ti LHC main dipoles with 11 T dipoles based on Nb 3 Sn superconductor compatible with the LHC lattice and main systems is being considered. To demonstrate this possibility FNAL and CERN have started a joint program to develop a 2 m long single-aperture dipole magnet with the nominal field of 11 T at ~11.85 kA current and 60 mm bore. This paper describes the demonstrator magnet magnetic and mechanical designs and analysis, coil fabrication procedure. The Nb 3 Sn strand and cable parameters and test results are also reported.

Amongst the magnet development program of a large-aperture Nb 3 Sn superconducting quadrupole for the Large Hadron Collider luminosity upgrade, six quadrupole magnets were built and tested using a shell based key and bladder technology (TQS). The 1 m long 90 mm aperture magnets are part of the US LHC Accelerator Research Program (LARP) aimed at demonstrating Nb 3 Sn technology by the year 2009, of a 3.6 m long magnet capable of achieving 200 T/m. In support of the LARP program the TQS magnets were tested at three different laboratories, LBNL, FNAL and CERN and while at CERN a technology-transfer and a four days magnet disassembly and reassembly were included. This paper summarizes the fabrication, assembly, cool-down and test results of the six magnets and compares measurements with design expectations.