In this paper, we report the results of the investigations on the transport properties performed across the manganite-manganite interface in the LaMnO3-δ/La0.7Ca0.3MnO3/LaAlO3 (LMO/LCMO/LAO) heterostructure. The bilayered heterostructure was synthesized by a low cost and simple chemical solution deposition (CSD) method by employing the acetate precursor route. The same LMO/LCMO/LAO heterostructure was also grown using the dry metal oxide chemical vapor deposition (CVD) method and the results of transport characterization have been compared on the basis of wet and dry chemical methods used. XRD Φ-scan measurements were carried out to verify the structural quality and crystallographic orientations of LMO and LCMO manganite layers, for both wet and dry chemical method grown heterostructures. For wet and dry chemical methods, the temperature dependent resistance of the LMO/LCMO interface suggests the metallic nature. The asymmetric I-V curves collected at different temperatures show normal diode characteristics which get transformed to backward diode characteristics at high temperatures under high applied voltages at Vtr for both the methods. The values of Vtr are strongly dependent on the chemical method used. I-V data have been fitted using the Simmons model at different temperatures and discussed in terms of the spin-flip scattering mechanism for both wet and dry chemical method grown heterostructures. The electric field dependent electroresistance (ER) behavior of the presently studied LMO/LCMO manganite-manganite interface, grown using wet and dry chemical methods, has been understood on the basis of complex mechanisms including charge injection, formation of the depletion region, the tunneling effect, thermal processes and junction breakdown and their dependence on the applied electric field, field polarity and temperature studied.

In this communication, we report results of the electrical transport properties across the interface of composites consisting of n-type LaMnO (LMO) and p-type LaCaMnO (LCMO) manganites grown on LaAlO (LAO) single crystalline substrates using low cost wet chemical solution deposition (CSD) and sophisticated, well-controlled dry chemical vapor deposition (CVD) chemical techniques. The XRD ϕ-scan studies reveal the single crystalline nature of both bilayered composites, with parallel epitaxial growth of LMO and LCMO layers onto the LAO substrate. The valence states of Mn ions in both layers of both composites were identified by performing X-ray photoelectron spectroscopy (XPS). The I-V characteristics of the LMO/LCMO interfaces show strong backward diode-like behavior at higher applied voltages well above the crossover voltage (V). Below V, the interfaces demonstrate normal diode-like characteristics throughout the studied temperature range. The electric field-induced modulation of the LMO/LCMO junction resistance of the interfaces has been observed. Electric field-dependent electroresistance (ER) modifications at different temperatures have also been studied. The electrical transport properties have been discussed in the context of various mechanisms, such as charge injection, tunneling, depletion region modification and thermal processes across the interface. The effects of structurally and chemically developed sharp interfaces between the LMO and LCMO layers on the transport properties of the presently studied bilayered thin film composites have been discussed on the basis of correlation between the physicochemical characterization and charge transport behavior. A comparison of different aspects of the transport properties has been presented in the context of the structural strain and crystallinity of the composites grown using both wet and dry chemical techniques.

No abstract