Lignin forms a large part of plant biomass. It is a highly heterogeneous polymer of 4-hydroxyphenylpropanoid units and is embedded within polysaccharide polymers forming lignocellulose. Lignin provides strength and rigidity to plants and is rather resilient towards degradation. To improve the (bio)processing of lignocellulosic feedstocks, more effective degradation methods of lignin are in demand. Nature has found ways to fully degrade lignin through the production of dedicated ligninolytic enzyme systems. While such enzymes have been well thoroughly studied for ligninolytic fungi, only in recent years biochemical studies on bacterial enzymes capable of lignin modification have intensified. This has revealed several types of enzymes available to bacteria that enable them to act on lignin. Two major classes of bacterial lignin-modifying enzymes are DyP-type peroxidases and laccases. Yet, recently also several other bacterial enzymes have been discovered that seem to play a role in lignin modifications. In the present review, we provide an overview of recent advances in the identification and use of bacterial enzymes acting on lignin or lignin-derived products.

DyP-type peroxidases are heme-containing enzymes that have received increasing attention over recent years with regards to their potential as biocatalysts. A novel DyP-type peroxidase (CboDyP) was discovered from the alkaliphilic cellulomonad, Cellulomonas bogoriensis, which could be overexpressed in Escherichia coli. The biochemical characterization of the recombinant enzyme showed that it is a heme-containing enzyme capable to act as a peroxidase on several dyes. With the tested substrates, the enzyme is most active at acidic pH values and is quite tolerant towards solvents. The crystal structure of CboDyP was solved which revealed atomic details of the dimeric heme-containing enzyme. A peculiar feature of CboDyP is the presence of a glutamate in the active site which in most other DyPs is an aspartate, being part of the DyP-typifying sequence motif GXXDG. The E201D CboDyP mutant was prepared and analyzed which revealed that the mutant enzyme shows a significantly higher activity on several dyes when compared with the wild-type enzyme.

Introduction Coronavirus disease 2019 (COVID-19) is the largest outbreak to strike the world since the Spanish flu in 1918. Visual examination of the world map shows a wide variation of death tolls between countries. The main goal of our series is to determine the best predictors of such discrepancy. Methods This is a retrospective study in which the rate of COVID-19 deaths was correlated with each of the following independent variables: total tests per 1 million population, gross domestic product (GDP), average temperatures per country, ultraviolet index, median age, average BMI per country, food supply, Bacille Calmette-Guerin compulsory status, and passenger traffic. Results BMI per country proved to be the second best predictor of death rate with an R value of 0.43, and GDP being the best predictor with R = 0.65. Conclusion This article shows a tight correlation between average BMI, food supply per country, and COVID-19-related deaths. Such predisposing factors might operate by upregulating the inflammation pathway in heavily struck countries, leading to easier triggering of the infamous cytokine storm syndrome. Obesity also increases cardiovascular and respiratory morbidities, which are coupled to increased ICU demand and deaths among infected cases. Video abstract: http://links.lww.com/CAEN/A25.

These results clearly demonstrate that Tadenan pretreatment protected the bladder from the contractile dysfunctions induced by partial outlet obstruction.

Syntheticl ignin wasp reparedb iocatalytically in ao ne-pot, two-stepr eactionu sing an oxidase/peroxidasec ascade enzyme system. Using eugenoli nc ombination with eugenolo xidase and a peroxidase,l ignin-like material was produced. The cascade reactiont akes advantage of the ability of the oxidase to produce coniferyla lcohol and hydrogen peroxide from eugenola nd molecular oxygen. The hydrogenp eroxide is usedb yt he peroxidasef or the formation of crosslinks that typify lignin. As eugenol oxidase has ab road substrate acceptance profile, also 4-allylphenol (chavicol) and 4-allyl-2,6-dimethoxyphenol could be used as precursors of the synthetic lignin. As ar esult, all three naturally occurring monolignols couldb ep repared and incorporated in the synthetic lignin. Ther eaction was optimized in order to achievet he highest possible yield of insoluble lignin oligomers and scaled up to 1g ram.A nalysis of the water-insoluble product by gel permeation chromatography revealed the formation of relatively small lignin oligomers ( % 1000 dalton). By using twodimensional heteronuclear single quantum coherence nuclear magnetic resonance spectroscopy (2D HSQC NMR) analysis it could be demonstratedt hat the material contained a-O-4/b-O-4, b-O-4, b-b, b-5 linkages and dibenzodioxocin units.All these featuresindicate that the biocatalytically produced material closely resembles natural lignin. While 54% of eugenol wasc onverted into water-insoluble oligomers, the remaining substrate was converted into watersoluble dimersa nd tetramers which are important lignin model compounds.T herefore,t he presented method represents av aluable andf acile biocatalytic approachf or the preparation of lignin-like material and potentially valuable chemicals.

Syringaresinol was synthesized in a one-pot conversion containing eugenol oxidase (EUGO) and horseradish peroxidase (HRP) using the relatively cheap 2,6-dimethoxy-4-allylphenol as a substrate. This conversion is fully coupled as the hydrogen peroxide generated from the reaction of EUGO with the substrate is utilized by the HRP to convert the formed sinapyl alcohol into syringaresinol. To improve the performance of EUGO on 2,6-dimethoxy-4-allylphenol, structure-inspired enzyme engineering was performed. This yielded the I427A EUGO mutant that is significantly more efficient with 2,6-dimethoxy-4-allylphenol. The I427A EUGO mutant together with HRP were capable of efficiently producing syringaresinol as a major product. After optimization and upscaling the conversion to a semipreparative scale (1 gr), syringaresinol was obtained in 81% yield.

Solid state nuclear magnetic resonance (ssNMR) is a powerful and attractive characterization method for obtaining insights into the chemical structure and dynamics of a wide range of materials. Current interest in cellulose-based materials, as sustainable and renewable natural polymer products, requires deep investigation and analysis of the chemical structure, molecular packing, end chain motion, functional modification, and solvent–matrix interactions, which strongly dictate the final product properties and tailor their end applications. In comparison to other spectroscopic techniques, on an atomic level, ssNMR is considered more advanced, especially in the structural analysis of cellulose-based materials; however, due to a dearth in the availability of a broad range of pulse sequences, and time consuming experiments, its capabilities are underestimated. This critical review article presents the comprehensive and up-to-date work done using ssNMR, including the most advanced NMR strategies used to overcome and resolve the structural difficulties present in different types of cellulose-based materials.

Dye-decolorizing peroxidases (DyPs) constitute a superfamily of heme-containing peroxidases that are related neither to animal nor to plant peroxidase families. These are divided into four classes (types A, B, C, and D) based on sequence features. The active site of DyPs contains two highly conserved distal ligands, an aspartate and an arginine, the roles of which are still controversial. These ligands have mainly been studied in class A-C bacterial DyPs, largely because no effective recombinant expression systems have been developed for the fungal (D-type) DyPs. In this work, we employ ancestral sequence reconstruction (ASR) to resurrect a D-type DyP ancestor, AncDyPD-b1. Expression of AncDyPD-b1 in Escherichia coli results in large amounts of a heme-containing soluble protein and allows for the first mutagenesis study on the two distal ligands of a fungal DyP. UV-Vis and resonance Raman (RR) spectroscopic analyses, in combination with steady-state kinetics and the crystal structure, reveal fine pH-dependent details about the heme active site structure and show that both the aspartate (D222) and the arginine (R390) are crucial for hydrogen peroxide reduction. Moreover, the data indicate that these two residues play important but mechanistically different roles on the intraprotein long-range electron transfer process.