Direct Metal Laser Sintering (DMLS) is one of the additive manufacturing technologies involving a metal powder bed and a laser source to obtain components of complex geometry. The fatigue life of an as-built DMLS part is negatively influenced by the rough surface compared to a machined surface. Since most DMLS components are expected to have also stress concentrations, here the combined effect on fatigue of a as-built surface and a geometrical notch in as-built DMLS Ti6Al4V was investigated using a new test methodology. Miniature specimens having three different directions with respect to build direction were fabricated and tested determining the directional fatigue notch sensitivity of as-built DMLS Ti6Al4V Optical inspection of notch surface quality and roughness measurements demonstrated a ranking of the directional notches that inversely correlated to the measured fatigue performance. The link among the curved surface orientation, the peculiar layer-wise additive manufacturing fabrication and the fatigue notch sensitivity is clarified.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.