No abstract

Explosive field emission cathodes comprise an important class of cathodes for high power microwave tubes, having the advantages of light weight as well as requiring no heater for electron emission. Generally, however, this class of cathodes suffers from large amounts of outgassing, nonuniform emission, and very high emittance. This article describes a new class of carbon velvet cathodes that have been coated with a cesium iodide (CsI) salt. We discuss two manifestations of the cathode. We review the lifetime and operation of the cathodes with two different pulse durations, as well as the outgassing from the cathodes during operation. Lifetimes in excess of 980 000 pulses have been obtained, with an outgassing rate of 3.5 atoms per electron. Finally, we discuss the uniformity and emittance of tufted carbon cathodes that have been coated with CsI salt. For comparison, we relate these results to those previously obtained from other cathodes in this class. The cathodes have an emittance of 2.5π mm rad, as compared to the theoretical value, based on computation, of 2.3π mm rad. These new cathodes differ greatly from cathodes such as polymer velvet and tufted carbon fiber cathodes in that no volatiles reside on the cathode and in that a unique coating technique allows the cathodes to function. This new class of cathodes offers a potential replacement for existing thermal cathodes, in that no heater is required for superior operation with low outgassing and long lifetime.

No abstract

Explosive field emission cathodes have been a subject of research for a number of years. These cathodes offer high current densities and total current without requiring a heater for the production of electrons. Generally these cathodes consist of some structure with a series of tips or metal–dielectric regions in which a large electric field enhancement can occur. A cathode plasma is then formed from these discharge points that then supplies the electrons necessary for space charge limited emission. This article reports on a series of optical measurements in which the cathode and anode plasmas of explosive field emission cathodes are observed. Three types of cathodes are investigated. These types are a polymer velvet cathode, a metal–dielectric cathode, and a tufted carbon fiber cathode in which the fibers have been coated with a cesium iodide salt. Cesium iodide coated carbon fiber cathodes have shown a great deal of promise for various field emitter applications. From these high speed photos, the evolution of the plasmas on both cathode and anode can be qualitatively ascertained. Experimentally we find that not only does cathode plasma behavior depend on the type of cathode, but the anode plasma behavior does also. Further, we find that the best performing cathode shows the most rapid plasma formation on both anode and cathode, yet without a rapid plasma expansion across the anode–cathode gap.

No abstract

The effect of ions in a magnetically insulated crossed-field gap is studied using a single particle orbit model, shear flow model, and particle-in-cell simulation. It is found that, in general, the presence of ions in a crossed-field gap always increases the electrons' excursion toward the anode region, regardless of the location of the ions. Thus, the rate at which the electrons migrate toward the anode, which is a measure of the diode closure rate, is related to the rate at which ions are introduced into the crossed-field gap. This anode migration of electrons is unrelated to crossed-field ambipolar diffusion. The implications of these findings are explored, such as pulse shortening in relativistic magnetrons and bipolar flows in pulsed-power systems.

No abstract

No abstract