No abstract

This paper presents systematic studies of hydrophilic metal oxide nanoparticles (NPs) dispersed in brine intended to reveal their potential to enhance oil recovery (EOR) in various rock wettability systems. The stability in suspension (nanofluid) of the NPs has been identified as a key factor related to their use as an EOR agent. Experimental techniques have been developed for nanofluid stability using three coupled methods: direct visual observation, surface conductivity and particle size measurements. The use of a dispersant has been investigated and has been shown to successfully improve metal oxide nanofluid stability as a function of its concentration. The dispersant alters the nanofluid properties, i.e. surface conductivity, pH and particle size distribution. A twophase coreflood experiment was conducted by injecting the stable nanofluids as a tertiary process (nano-EOR) through core plugs with various wettabilities ranging from waterwet to oil-wet. The combination of metal oxide nanofluid and dispersant improved the oil recovery to a greater extent than either silica-based nanofluid or dispersant alone in all wettability systems. The contact angle, interfacial tension (IFT) and effluent were also measured. It was observed that metal oxide-based nanofluids altered the quartz plates to become more water-wet, and the results are consistent with those of the coreflood experiment. The particle adsorption during the transport process was identified from effluent analysis. The presence of NPs and dispersant reduced the IFT, but its reduction is sufficient to yield significant additional oil recovery. Hence, wettability alteration plays a dominant role in the oil displacement mechanism using nano-EOR.

Chemical enhanced oil recovery is another strong growing technology with the potential of a step change innovation, which will help to secure future oil supply by turning resources into reserves. While Substantial amount of crude oil remains in the reservoir after primary and secondary production, conventional production methods give access to on average only one-third of original oil in place, the use of surfactants and polymers allows for recovery of up to another third of this oil. Chemical flooding is of increasing interest and importance due to high oil prices and the need to increase oil production. Research in nanotechnology in the petroleum industry is advancing rapidly and an enormous progress in the application of nanotechnology in this area is to be expected. Nanotechnology has the potential to profoundly change enhanced oil recovery and to improve mechanism of recovery. This paper, therefore, focuses on the reviews of the application of nano technology in chemical flooding process in oil recovery and reviews the application nano in the polymer and surfactant flooding on the interfacial tension process.

Chemical flooding is of increasing interest and importance due to high oil prices and the need to increase oil production. Research in nanotechnology in the petroleum industry is advancing rapidly, and an enormous progress in the application of nanotechnology in this area is to be expected. The nanotechnology has been widely used in several other industries, and the interest in the oil industry is increasing. Nanotechnology has the potential to profoundly change enhanced oil recovery and to improve mechanism of recovery, and it is chosen as an alternative method to unlock the remaining oil resources and applied as a new enhanced oil recovery method in last decade. This paper therefore focuses on the reviews of the application of nanotechnology in chemical flooding process in oil recovery and reviews the applications of nanomaterials for improving oil recovery that have been proposed to explain oil displacement by polymer flooding within oil reservoirs, and also this paper highlights the research advances of polymer in oil recovery. Nanochemical flooding is an immature method from an application point of view.

Align with current dynamic technology development, waterflooding techniques have been improved and optimized to have better oil recovery performance. In addition the latest worldwide industries innovation trends are miniaturization and nanotechnology materials such as nanoparticles. Hence one of the ideas is using nanoparticles to assist waterflood performance. However it is crucial to have a clear depiction of some parameters that may influences displacement process. The focus of this study is to investigate the effects of some parameters influencing oil recovery process due to nanoparticles such as particle size, rock permeability, initial rock wettability, injection rate and temperature. This study is part of our ongoing research in developing nanofluids for future or alternative enhanced oil recovery (Nano-EOR) method. Three different sizes of hydrophilic silica nanoparticles with single particle diameter range from 7 to 40 nm were employed and have been characterized under scanning electron microscope (SEM). Nanofluids were synthesized using 0.05 wt.% nanoparticles that dispersed into synthetic brine (NaCl 3 wt.% ~ 30,000 ppm). The contact angle variation due to nanoparticles size was also measured at room condition. Coreflood experiment has been conducted using 26 Berea sandstone cores to evaluate the effect of those parameters above on oil recovery due to Nano-EOR. The cores permeability was in range from 5 to 450 mD. To study the effect of initial rock wettability on oil recovery due to Nano-EOR, original core wettability has been changed with aging process from water-wet to intermediate and oil-wet respectively. Temperature was also studied in range 25-80 °C to fulfill the possibility of applying Nano-EOR at reservoir temperature. The coreflood testing was repeated for each case to have consistency result. The processes and results are outlined and also further detailed in the paper to bring knowledge about nanoparticles flooding as a future promising EOR method.