In the present study, the influence of thermally induced damage of reinforced concrete (RC) frames on their static and dynamic response is experimentally and numerically investigated. In the experimental test, the RC frame is first pre-damaged through fire exposure and then loaded from the side with the impact of a steel pendulum. To verify the recently developed coupled thermo-mechanical model for concrete, transient 3D FE simulation is carried out. The rate and temperature-dependent microplane model is used as a constitutive law for concrete. It is first shown that the simulation is able to realistically replicate the experimental test. Subsequently, the numerical parametric study is performed where the dynamic and static response of RC frame is simulated for both hot and cold states. It is shown that the pre-damage of RC frame through fire exposure significantly reduces the resistance and changes the response. Finally, it is demonstrated that for the impact load the rate sensitive constitutive law of concrete significantly contributes to the response of RC frame.
In the paper, the performance of two phase change materials (PCMs) is evaluated numerically and experimentally. Technical requirements, size limitations and time response of the PCM present crucial boundary conditions when choosing the right material and storage type in the residential sector. The latent heat thermal energy storage system analysed in this paper is a modified shell-and-tube type of heat exchanger using paraffin wax RT-28-HC and a bio-based substance PureTemp28 as phase change materials with heat storage capacity of 255 and 190 kJ/kg, respectively. Their phase change transition temperatures are between 27 and 29 °C which makes them suitable for domestic applications together with underfloor heating and heat pump units. In order to properly validate the simulation results, a corresponding machine with the similar initial and boundary conditions has been set up. Additionally, to account for all possible impacts on the performance of the PCM, thermal storage unit was equipped with 24 radially distributed temperature sensors, a pump with variable rotational speed and a water supply machine that operates in temperature ranges from -50 to 150 °C. The results from the experiment exhibit very good correlation with the numerical simulations concerning the charging and discharging times.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.