No abstract

Armour layer scour protections around offshore wind turbine foundations are commonly designed to provide a static protection in storm conditions, which means no or limited movement of rock is allowed (Den Boon et al., 2004, De Vos et al., 2011). This approach often results in large stone sizes and high scour protection costs. Therefore, a dynamic approach can be an interesting alternative. Such a dynamic design can be achieved by decreasing the armour stone size allowing movement of the stones and increasing the armour layer thickness to prevent filter layer exposure. A physical test program was conducted to investigate the feasibility and behaviour of such a dynamically stable scour protection. In this model, a monopile foundation exposed to typical North Sea combinations of unidirectional currents and waves was reproduced in a wave flume. The program included a number of test series each with different water depths. In each test series, the armour layer stone size and the armour layer thickness were varied, in order to obtain a reshaping scour protection, without filter material exposure. Damage and failure were assessed both visually and using a 3D-laser profiler. Because previous works on damage numbers of rock armour layer scour protections mainly focus on static design, a new damage number was introduced and compared to the visual observation. This allowed the definition of a ‘dynamic area’ between static design and failure. Scour pit development in time and equilibrium profiling were also analyzed. The results of the tests showed that the concept of a dynamically stable scour protection is feasible.

Scour protection is an important component of fixed bottom foundations for offshore wind turbines. Depending on the hydrodynamic conditions, they might be indispensable to avoid the structural collapse of the foundation due to scour phenomena. The design of scour protections is typically deterministic, which often results in overestimated mean diameters of the armour layer. Moreover, the design methodologies currently applied do not provide a measure of safety associated with the proposed design. The present research proposes a novel methodology to assess the safety of the protection and to perform the probabilistic design of static and dynamic scour protections. A case study based on Horns Rev 3 offshore wind farm is used to show how to select the mean stone diameter according to a pre-defined probability of failure of the protection. The results show that a dynamic scour protection could be safely designed with a reduction of the mean stone diameter up to 15 cm, when compared with the statically stable protection.

Full bibliographic details must be given when referring to, or quoting from full items including the author's name, the title of the work, publication details where relevant (place, publisher, date), pagination, and for theses or dissertations the awarding institution, the degree type awarded, and the date of the award.

No abstract

No abstract

Joint statistical models for long-term wave climate are a key aspect of offshore wind engineering design. However, to find a joint model for sea-state characteristics is often difficult due to the complex nature of the wave climate and the physical constraints of seastate phenomena. The available records of wave heights and periods are often very asymmetric in their nature. This paper presents a copula-based approach to obtain the joint cumulative distribution function of significant wave heights and the mean up-crossing periods. This study is based on 124 months hindcast data concerning Horns Rev 3 offshore wind farm. The extra-parametrization technique of symmetric copulas is implemented to account for the asymmetry present in the data. The analysis of the total sea, the wind-sea and primary swell components is performed separately. The results show that the extraparametrization technique with pairwise copulas consistently provided a better goodnessof-fit when compared to symmetric copulas. Moreover, it is demonstrated that the separation of the total sea into its components does not always improve the extraparametrized copula's performance. Furthermore, this paper also discusses copula application to offshore wind engineering.

No abstract