Hoje em dia, a necessidade de utilizar materiais ecologicamente corretos tem aumentando em paralelo com a constante busca de novas tecnologias para produzir materiais renováveis, economicamente viáveis e tecnologicamente avançados, o que justifica esse trabalho. O presente trabalho consiste em estudar o comportamento mecânico de compósitos de matriz poliéster reforçados com fibras de cânhamo e testadas com impacto Izod. Para a realização deste teste, foram feitas amostras com dimensões de 10 mm de largura, 63 mm de comprimento e 12,7 mm de espessura em diferentes frações volumétricas de fibra, 0%, 10%, 20% e 30%. As amostras foram testadas em um conjunto pendular PANTEC na configuração Izod, modelo XC-50 localizado no LAMAV/UENF. A energia de impacto Izod dos compósitos de poliéster de 30% de fibras de cânhamo foi de 169,4 J/m.
ResumoA busca por materiais que atendam as demandas ambientais que vem surgindo com o passar dos anos abre um importante mercado para a aplicação de fibras naturais. Além de biodegradáveis e provenientes de fontes renováveis, as fibras naturais possibilitam a produção de materiais compósitos de baixa densidade e com boas propriedades mecânicas. Para aumentar ainda mais essas propriedades, estuda-se o uso de tecidos de fibra natural em vez das fibras alinhas. As principais vantagens desta nova configuração são o reforço em mais de uma direção ao mesmo tempo e o fato de serem mais compactos, viabilizando a incorporação de uma fração maior de material de reforço. O presente trabalho investigou a resistência ao impacto de compósitos de matriz poliéster reforçados com tecido puro de rami, que é uma das fibras lignocellusosicas mais resistentes encontradas até hoje. Os corpos de prova foram reforçados com 1, 2 e 3 camadas de tecido e foram ensaiados num pêndulo de impacto Izod. Concluiu-se com base nos resultados que o aumento da fração volumétrica de tecido aumenta a resistência ao impacto dos compósitos. Palavras-chave: Impacto Izod; Tecido de rami; Poliéster; Fibras naturais.
IZOD IMPACT BEHAVIOR OF POLYESTER MATRIX COMPOSITES REINFORCED WITH PURE RAMIE FABRIC AbstractThe search for materials that meet the environmental demands that has emerged over the years opens an important market for the application of natural fibers. In addition to being biodegradable and from renewable sources, natural fibers enable the production of composite materials of low density and good mechanical properties. To further increase these properties, it is studied the use of natural fiber fabrics instead of aligned fibers. The main advantages of this new configuration are to reinforce the composite in more than one direction simultaneously and, due to their compactness, to enable the incorporation of a larger fraction of reinforcing material. This study has investigated the impact resistance of composite polyester matrix reinforced with pure ramie fabric, which is one of the strongest lignocellullosic fibers found today. The specimens were reinforced with 1, 2 and 3 layers of fabric and were tested in Izod impact pendulum. Based on the results, it is concluded that increasing the volume fraction of fabric it increases the impact resistance of the composites.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.