Este é um artigo publicado em acesso aberto (Open Access) sob a licença Creative Commons Attribution Non-Commercial, que permite uso, distribuição e reprodução em qualquer meio, sem restrições desde que sem fins comerciais e que o trabalho original seja corretamente citado.Recebido: 26 Abr., 2017 Aceito: 30 Out., 2017 E-mail: lucasbehene@gmail.com (LB)Resumo: As pás de turbinas utilizadas na geração de energia em usinas hidrelétricas são fabricadas de aço inoxidável martensítico macio e estão sujeitas ao aparecimento de trincas pela presença da ferrita δ. As trincas precisam ser reparadas e processos de soldagem são utilizados. A ferrita δ mostra-se prejudicial às propriedades de resistência ao impacto e à corrosão dos aços martensíticos macios. O presente trabalho estuda a presença dessa fase num aço martensítico macio soldado através do processo Plasma com alimentação de vareta. Foram retirados corpos de prova de uma pá de turbina fabricada de aço ASTM 743 tipo CA6NM que foram soldados com adição de eletrodo ER410NiMo. A soldagem foi realizada com multipasse e os parâmetros variados foram corrente, pós aquecimento e recuo do eletrodo. O objetivo é avaliar a presença da ferrita δ na microestrutura de solidificação e na zona termicamente afetada. A ferrita δ mostrou-se presente tanto no interpasse, como no cordão de solda e ZTA dos corpos de prova. Foi observado que a soldagem multipasse contribui para uma diminuição do teor da ferrita no metal de adição devido aos passes subsequentes e que a soldagem com maiores correntes apresentaram uma menor retenção da ferrita δ no metal de adição.Palavras-chave: CA6NM; Plasma; multipasse; ferrita δ. Formation of Delta Ferrite in Welding of Super Martensitic Stainless Steel type CA6NM by Plasma Process PTAAbstract: The blades of the turbines used in hydroelectric plants made of soft martensitic stainless steel are subject to the appearance of cracks. These discontinuities demand repairs and welding processes are used to do so. The δ ferrite shown to be detrimental to the properties of corrosion resistance and have a negative impact on the microstructure of a soft martensitic steel. This paper studies the presence of this phase in a soft martensitic stainless steel welded by Plasma arc welding process with feed. Specimens of a turbine blade made of steel ASTM 743 type CA6NM were removed and welded with addition of electrode ER410NiMo. The welding was performed with multipass and the varied parameters were current, post heating and indentation of the electrode. The objective is to evaluate the presence of δ ferrite in the microstructure. This phase was present both in the interpass, as in the weld and HAZ of the specimens. It was observed that the multipass welding contributes to a decrease in the content of ferrite in weld metal due to subsequent welding passes and with larger currents had lower retention of δ ferrite in the weld metal.Key-words: CA6NM; Plasma; multipass; δ ferrite. IntroduçãoA geração de energia no Brasil é altamente dependente das usinas hidrelétricas, sen...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.