BackgroundNanomaterials can be contaminated with endotoxin (lipopolysaccharides, LPS) during production or handling. In this study, we searched for a convenient in vitro method to evaluate endotoxin contamination in nanoparticle samples. We assessed the reliability of the commonly used limulus amebocyte lysate (LAL) assay and an alternative method based on toll-like receptor (TLR) 4 reporter cells when applied with particles (TiO2, Ag, CaCO3 and SiO2), or after extraction of the endotoxin as described in the ISO norm 29701.ResultsOur results indicate that the gel clot LAL assay is easily disturbed in the presence of nanoparticles; and that the endotoxin extraction protocol is not suitable at high particle concentrations. The chromogenic-based LAL endotoxin detection systems (chromogenic LAL assay and Endosafe-PTS), and the TLR4 reporter cells were not significantly perturbed.ConclusionWe demonstrated that nanoparticles can interfere with endotoxin detection systems indicating that a convenient test method must be chosen before assessing endotoxin contamination in nanoparticle samples.

The unique physical and chemical properties of nanomaterials have led to their increased use in many industrial applications, including as a paint additive. For example, titanium dioxide (TiO2) engineered nanoparticles (ENPs) have well-established anti-UV, self-cleaning, and air purification effects. Silver (Ag) ENPs are renowned for their anti-microbial capabilities and silicon dioxide (SiO2) ENPs are used as fire retardants and anti-scratch coatings. In this study, the toxic effects and biodistribution of three pristine ENPs (TiO2, Ag, and SiO2), three aged paints containing ENPs (TiO2, Ag, and SiO2) along with control paints without ENPs were compared. BALB/c mice were oropharyngeally aspirated with ENPs or paint particles (20 μg/aspiration) once a week for 5 weeks and sacrificed either 2 or 28 days post final aspiration treatment. A bronchoalveolar lavage was performed and systemic blood toxicity was evaluated to ascertain cell counts, induction of inflammatory cytokines, and key blood parameters. In addition, the lung, liver, kidney, spleen, and heart were harvested and metal concentrations were determined. Exposure to pristine ENPs caused subtle effects in the lungs and negligible alterations in the blood. The most pronounced toxic effects were observed after Ag ENPs exposure; an increased neutrophil count and a twofold increase in pro-inflammatory cytokine secretion (keratinocyte chemoattractant (KC) and interleukin-1ß (IL-1ß)) were identified. The paint containing TiO2 ENPs did not modify macrophage and neutrophil counts, but mildly induced KC and IL-1ß. The paints containing Ag or SiO2 did not show significant toxicity. Biodistribution experiments showed distribution of Ag and Si outside the lung after aspiration to respectively pristine Ag or SiO2 ENPs. In conclusion, we demonstrated that even though direct exposure to ENPs induced some toxic effects, once they were embedded in a complex paint matrix little to no adverse toxicological effects were identified.

In this study, different conventional personal protection devices (fibrous filters, cartridges for respirators, protective clothing, and gloves) well qualified for micron particles were tested with graphite nanoparticles ranging from 10 to 100 nm (electrical mobility diameter). For this purpose, two specific test benches were designed: one for filter-based devices which are tested under a controlled air flow and other for gloves and protective clothing based on the “through diffusion method.” The penetration versus particle size shows for most tested filter media the behavior predicted by the theoretical Brownian capture: penetration decreases when particle diameter decreases. No thermal rebound was detected until 10 nm for graphite nanoparticles. Protective clothes were tested by two methods and same trends were obtained. Nonwoven fabrics (air-tight materials) are much more efficient against nanoparticles than cotton and paper. Gloves tested by “through diffusion technique,” in static condition seem to efficiently protect against graphite nanoparticles in spite of their important porosity.

No abstract

In the assessment of the fate and effects of engineered nanomaterials (ENM), the current focus is on studying the pristine, unaltered materials. However, ENM are incorporated into products and are released over the whole product life cycle, though mainly during the use and disposal phases. So far, released ENMs have only been characterized to a limited extent and almost nothing is known about the behavior of these materials under natural conditions. In this work we obtained material that was released from aged paint containing nano-TiO2, characterized the particulate materials, and studied their colloidal stability in media with different pH and ionic composition. A stable suspension was obtained from aged paint powder by gentle shaking in water, producing a dilute suspension of 580 μg/L TiO2 with an average particle size of 200-300 nm. Most particles in this suspension were small pieces of paint matrix that also contained nano-TiO2. Some free nano-TiO2 particles were observed by electron microscopy, but the majority was enclosed by the organic paint binder. The pristine nano-TiO2 showed the expected colloidal behavior with increasing stability with increasing pH and strong agglomeration above the isoelectric point and settling in the presence of Ca. The released TiO2 showed very small variations in particle size, ζ potential, and colloidal stability, even in the presence of 3 mM Ca. The results show that the behavior of released ENM may not necessarily be predicted by studying the pristine materials. Additionally, effect studies need to focus more on the particles that are actually released as we can expect that the toxic effect will also be markedly different between pristine and product released materials.

No abstract

No abstract

We have demonstrated that topical exposure to TiO2 ENPs increases chemical-induced dermal sensitization.