Localization in underwater environments has been constrained by the dependencies on the line of sight (LOS) due to the challenging variability's of the environment. This dependency hinders node discovery and ad-hoc formation in underwater networks and limits the performance of routing protocols. Most proposed algorithms in the literature rely on anchor nodes that are at fixed positions to serve as reference points, which is not practical in many applications. This paper introduces a novel approach to the localization problem that allows for node discovery without depending on the LOS and any fixed reference nodes. In the proposed surface-based reflection anchor-free localization (SBRAL) algorithm all nodes will apply homomorphic deconvolution to establish a water-surfacereflected communication link. SBRAL then creates a relative coordinate system where every node in the network identifies others nodes by increasing the SBRAL transmit angle and using the reflection points on the water surface as temporary reference points. The simulation results confirm the effectiveness of the proposed SBRAL algorithm.
The 3-D nature of the underwater environment has made geographical-routing a popular choice in underwater acoustic sensor networks (UW-ASNs). A geographical (geo) routing protocol works by using the position information to find the best route from a source to a destination. These algorithms, often try to minimize the line-of-sight (LOS) Euclidean distance between hops, which is not always possible due to blocked LOS paths resulting in voids (or local minimum). Thus, traditional geo-routing algorithms typically employ a face routing recovery scheme that allows for back-tracking when blocked LOS links are encountered, which adds delay to the data delivery time. To overcome this, we propose a geo-routing scheme that does not depend on the LOS and utilize directional antennas to incorporate surface-reflected non-line-of-sight (NLOS) links in the routing process. Furthermore, the proposed algorithm is configured to optimize the route selection to achieve maximum network throughput. Simulation results are provided to validate the performance of the proposed algorithm.
Chronic obstructive pulmonary disease (COPD) is the third leading cause of death worldwide with over 3 × 10 6 deaths in 2019. Such an alarming figure becomes frightening when combined with the number of lost lives resulting from COVID-caused respiratory failure. Because COPD exacerbations identified early can commonly be treated at home, early symptom detections may enable a major reduction of COPD patient readmission and associated healthcare costs; this is particularly important during pandemics such as COVID-19 in which healthcare facilities are overwhelmed. The standard adjuncts used to assess lung function (e.g., spirometry, plethysmography, and CT scan) are expensive, time consuming, and cannot be used in remote patient monitoring of an acute exacerbation. In this paper, a wearable multi-modal system for breathing analysis is presented, which can be used in quantifying various airflow obstructions. The wearable multi-modal electroacoustic system employs a body area sensor network with each sensor-node having a multi-modal sensing capability, such as a digital stethoscope, electrocardiogram monitor, thermometer, and goniometer. The signal-to-noise ratio (SNR) of the resulting acoustic spectrum is used as a measure of breathing intensity. The results are shown from data collected from over 35 healthy subjects and 3 COPD subjects, demonstrating a positive correlation of SNR values to the health-scale score.
The COVID-19 pandemic has highlighted how the healthcare system could be overwhelmed. Telehealth stands out to be an effective solution, where patients can be monitored remotely without packing hospitals and exposing healthcare givers to the deadly virus. This article presents our Intel award winning solution for diagnosing COVID-19 related symptoms and similar contagious diseases. Our solution realizes an Internet of Things system with multimodal physiological sensing capabilities. The sensor nodes are integrated in a wearable shirt (vest) to enable continuous monitoring in a noninvasive manner; the data are collected and analyzed using advanced machine learning techniques at a gateway for remote access by a healthcare provider. Our system can be used by both patients and quarantined individuals. The article presents an overview of the system and briefly describes some novel techniques for increased resource efficiency and assessment fidelity. Preliminary results are provided and the roadmap for full clinical trials is discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.