It is of great significance to seek high-performance solid electrolytes via a facile chemistry and simple process for meeting the requirements of solid batteries. Previous reports revealed that ion conducting pathways within ceramic-polymer composite electrolytes mainly occur at ceramic particles and the ceramic-polymer interface. Herein, one facile strategy toward ceramic particles' alignment and assembly induced by an external alternating-current (AC) electric field is presented. It was manifested by an in situ optical microscope that LiAlTi(PO) particles and poly(ethylene glycol) diacrylate in poly(dimethylsiloxane) (LATP@PEGDA@PDMS) assembled into three-dimensional connected networks on applying an external AC electric field. Scanning electron microscopy revealed that the ceramic LATP particles aligned into a necklacelike assembly. Electrochemical impedance spectroscopy confirmed that the ionic conductivity of this necklacelike alignment was significantly enhanced compared to that of the random one. It was demonstrated that this facile strategy of applying an AC electric field can be a very effective approach for architecting three-dimensional lithium-ion conductive networks within solid composite electrolyte.

No abstract

Poly (lactic acid) (PLA) is a renewable and biodegradable polymer with high modulus, high strength but low toughness. Blending PLA with plant fiber has been believed an available strategy to improve the toughness of PLA. PLA/Flax composites were fabricated by extrusion and injection molding processes. The flax fiber surfaces were modified before blending to improve the compatibility, and the chemical structures of both untreated and treated fiber were characterized by Fourier transform infrared spectroscopy. Results of mechanical test showed that the impact strength and elongation at break of PLA/Flax composites were remarkably higher than PLA. The impact fractures of PLA/Flax composites were also observed by scanning electron microscope. The results showed uniform dispersion of fibers in PLA matrix and good compatibility between treated fibers and PLA matrix. Moreover, it can be observed that crazing propagation was hindered by fibers and transcrystalline developed along fibers by polarized optical microscope. Differential scanning calorimetry analysis was carried out to study the crystallinity of PLA and it was found that incorporation of fiber improved the crystallinity of PLA. The toughening mechanism of PLA/Flax composites was discussed according to the results.