Ultrathin MnO 2 /graphene oxide/carbon nanotube (G/M@CNT) interlayers are developed as efficient polysulfide-trapping shields for high-performance Li-S batteries. A simple layer-by-layer procedure is used to construct a sandwiched vein-membrane interlayer of thickness 2 µm and areal density 0.104 mg cm −2 by loading MnO 2 nanoparticles and graphene oxide (GO) sheets on superaligned carbon nanotube films. The G/M@CNT interlayer provides a physical shield against both polysulfide shuttling and chemical adsorption of polysulfides by MnO 2 nanoparticles and GO sheets. The synergetic effect of the G/M@CNT interlayer enables the production of Li-S cells with high sulfur loadings (60-80 wt%), a low capacity decay rate (−0.029% per cycle over 2500 cycles at 1 C), high rate performance (747 mA h g −1 at a charge rate of 10 C), and a low self-discharge rate with high capacity retention (93.0% after 20 d rest). Electrochemical impedance spectroscopy, cyclic voltammetry, and scanning electron microscopy observations of the Li anodes after cycling confirm the polysulfide-trapping ability of the G/M@CNT interlayer and show its potential in developing high-performance Li-S batteries.

Highly flexible and transparent strain sensors are fabricated by directly coating super-aligned carbon nanotube (SACNT) films on polydimethylsiloxane (PDMS) substrates. The fabrication process is simple, low cost, and favorable for industrial scalability. The SACNT/PDMS strain sensors present a high sensing range of 400%, a fast response of less than 98 ms, and a low creep of 4% at 400% strain. The SACNT/PDMS strain sensors can withstand 5000 stretching-releasing cycles at 400% strain. Moreover, the SACNT/PDMS strain sensors are transparent with 80% transmittance at 550 nm. In situ microscopic observation clarifies that the surface morphology of the SACNT film exhibits a reversible change during the stretching and releasing processes and thus its electrical conductance is able to fully recover to the original value after the loading-unloading cycles. The SACNT/PDMS strain sensors have the advantages of a wide sensing range, fast response, low creep, transparency, and excellent durability, and thus show great potential in wearable devices to monitor fast and large-scale movements without affecting the appearance of the devices.

No abstract

Macroscopic and 3D superaligned CNT (SACNT) sponges are fabricated through a simple, low-cost, controllable, and scalable self-assembly method without using organic binder. Sponges with specific shapes and densities can be achieved. SACNT sponges are ultralight (1-50 mg cm ), highly porous (97.5%-99.9%) with honeycomb-like hierarchical structure, and highly conductive. Using SACNT sponges as templates, various materials with honeycomb-like structure can be obtained for wide applications.

No abstract

In article number https://doi.org/10.1002/adfm.201606663, Jiaping Wang and co‐workers report on ultrathin MnO2/graphene oxide/carbon nanotube interlayers as efficient polysulfide‐trapping shields for high‐performance Li–S batteries. The sandwiched interlayer significantly alleviates polysulfide shuttling and improves cycling stability and rate performance. Self‐discharge and passivation‐layer‐formation on the anode are greatly suppressed by the excellent polysulfide‐trapping ability of the interlayer.

No abstract

No abstract