Electrically conductive biomaterials that can efficiently deliver electrical signals to cells or improve electrical communication among cells have received considerable attention for potential tissue engineering applications. Conductive hydrogels are desirable particularly for neural applications, as they can provide electrical signals and soft microenvironments that can mimic native nerve tissues. In this study, conductive and soft polypyrrole/alginate (PPy/Alg) hydrogels are developed by chemically polymerizing PPy within ionically cross-linked alginate hydrogel networks. The synthesized hydrogels exhibit a Young's modulus of 20-200 kPa. Electrical conductance of the PPy/Alg hydrogels could be enhanced by more than one order of magnitude compared to that of pristine alginate hydrogels. In vitro studies with human bone marrow-derived mesenchymal stem cells (hMSCs) reveal that cell adhesion and growth are promoted on the PPy/Alg hydrogels. Additionally, the PPy/Alg hydrogels support and greatly enhance the expression of neural differentiation markers (i.e., Tuj1 and MAP2) of hMSCs compared to tissue culture plate controls. Subcutaneous implantation of the hydrogels for eight weeks induces mild inflammatory reactions. These soft and conductive hydrogels will serve as a useful platform to study the effects of electrical and mechanical signals on stem cells and/or neural cells and to develop multifunctional neural tissue engineering scaffolds.

Electrode surfaces have been widely modified with electrically conductive polymers, including polypyrrole (PPY), to improve the performance of electrodes. To utilize conductive polymers for electrode modification, strong adhesion between the polymer films and electrode substrates should be ensured with high electrical/electrochemical activities. In this study, PPY films were electrochemically polymerized on electrodes (e.g., indium tin oxide (ITO)) with dopamine as a bio-inspired adhesive molecule. Efficient and fast PPY electrodeposition with dopamine (PDA/PPY) was found; the resultant PDA/PPY films exhibited greatly increased adhesion strengths of up to 3.7 ± 0.8 MPa and the modified electrodes had electrochemical impedances two to three orders of magnitude lower than that of an unmodified electrode. This electrochemical deposition of adhesive and conductive PDA/PPY offers a facile and versatile electrode modification for various applications, such as biosensors and batteries.

Conductive polymers (CPs) such as polypyrrole (PPY) are emerging biomaterials for use as scaffolds and bioelectrodes which interact with biological systems electrically. Still, more electrically conductive and biologically interactive CPs are required to develop high performance biomaterials and medical devices. In this study, in situ electrochemical copolymerization of polydopamine (PDA) and PPY were performed for electrode modification. Their material and biological properties were characterized using multiple techniques. The electrical properties of electrodes coated with PDA/PPY were superior to electrodes coated with PPY alone. The growth and differentiation of C2C12 myoblasts and PC12 neuronal cells on PDA/PPY was enhanced compared to PPY. Electrical stimulation of PC12 cells on PDA/PPY further promoted neuritogenesis. In vivo electromyography signal measurements demonstrated more sensitive signals from tibia muscles when using PDA/PPY-coated electrodes than bare or PPY-coated electrodes, revealing PDA/PPY to be a high-performance biomaterial with potential for various biomedical applications.

Shape memory polymer (SMP) foams are a promising material for hemostatic dressings due to their biocompatibility, high surface area, excellent shape recovery, and ability to quickly initiate blood clotting. Biodegradable SMP foams could eliminate the need for a secondary removal procedure of hemostatic material from the patients’ wound, further facilitating wound healing. In this study, we developed hydrolytically and oxidatively biodegradable SMP foams by reacting polyols (triethanolamine or glycerol) with 6‐aminocaproic acid or glycine to generate foaming monomers with degradable ester bonds. These monomers were used in foam synthesis to provide highly crosslinked SMP foam structures. The ester‐containing foams showed clinically relevant thermal properties that were comparable to controls and excellent shape recovery within eight min. Triethanolamine‐based ester‐containing foams showed interconnected porous structure along with increased mechanical strength. Faster hydrolytic and oxidative biodegradation rates were achieved in ester‐containing foams in comparison to controls. These biodegradable SMP foams with clinically applicable thermal properties possess great potential as an effective hemostatic device for use in hospitals or on battlefields.

Electrochemical deposition of dopamine-hyaluronic acid conjugates onto electrode surfaces can lead to preserved electrochemical activities and anti-biofouling properties of the electrodes.

Electrically conductive polymers, such as polypyrrole (PPy), have been widely used for the fabrication of various biosensors and tissue engineering scaffolds. For their biologically relevant applications, conductive biomaterials capable of intimate cellular interactions are highly desired. However, conventional methods to incorporate biomolecules into conductive polymers do not offer fine and easy control over the surface density of the biomolecules and/or their stability. We present a novel method to electrochemically immobilize cell-adhesive Arg-Gly-Asp (RGD) ligands on PPy electrode surfaces with a simple control over the peptide surface density by varying the electrodeposition time. Synthesized pyrrole-GGGRGDS conjugates were electrochemically incorporated onto the surfaces of PPy-coated electrodes. The electrochemical impedances of the RGD-grafted PPy electrodes were not significantly different from the unmodified PPy films. Time-of-flight secondary-ion mass spectroscopy confirmed the presence of the RGD motif on the surface of the modified electrodes. In vitro studies with human mesenchymal stem cells (hMSCs) showed higher adhesion and faster proliferation of hMSCs on the PPy with a higher RGD density. This facile electrochemical modification of electrode surfaces allowed for a good control over the peptide surface density and cellular interactions and will benefit the fabrication of cell-interactive scaffolds or bio-electrodes.

Various types of embolization devices have been developed for the treatment of cerebral aneurysms. However, it is challenging to properly evaluate device performance and train medical personnel for device deployment without the aid of functionally relevant models. Current in vitro aneurysm models suffer from a lack of key functional and morphological features of brain vasculature that limit their applicability for these purposes. These features include the physiologically relevant mechanical properties and the dynamic cellular environment of blood vessels subjected to constant fluid flow. Herein, we developed three-dimensionally (3D) printed aneurysm-bearing vascularized tissue structures using gelatin-fibrin hydrogel of which the inner vessel walls were seeded with human cerebral microvascular endothelial cells (hCMECs). The hCMECs readily exhibited cellular attachment, spreading, and confluency all around the vessel walls, including the aneurysm walls. Additionally, the in vitro platform was directly amenable to flow measurements via particle image velocimetry, enabling the direct assessment of the vascular flow dynamics for comparison to a 3D computational fluid dynamics model. Detachable coils were delivered into the printed aneurysm sac through the vessel using a microcatheter and static blood plasma clotting was monitored inside the aneurysm sac and around the coils. This biomimetic in vitro aneurysm model is a promising method for examining the biocompatibility and hemostatic efficiency of embolization devices and for providing hemodynamic information which would aid in predicting aneurysm rupture or healing response after treatment.

Shape-morphing polymers have gained particular attention due to their unique capability of shape transformation under numerous external stimuli such as light, pH, and temperature. Their shape-morphing properties can be used in various applications such as robotics, artificial muscles, and biomedical devices. To take advantage of the stimuli-responsive properties of the smart polymers in such applications, programming shape change precisely through a facile synthetic procedure is essential. Programmable shape-morphing is readily obtained in hydrogels and liquid crystal polymer networks, but shape programming of semicrystalline polymers usually relies on low-resolution mechanical deformation. In this paper, a semicrystalline shape-morphing polymer with a controlled shape programmability was developed via photopatterning crystal orientation using a spatially controlled photopolymerization technique. The semicrystalline polymer network forms aligned crystallites at the boundaries between dark and bright regions during photopolymerization using a projector, which introduces an anisotropic stimulus response in the films. The semicrystalline polymer films with photoaligned crystallites expand 9− 15% in the direction perpendicular to the patterned lines when heated above the melting temperature. Furthermore, spatially patterning the crystal orientation enables the formation of various complex 3D structures including a helical coil, a coil with a handedness inversion, a cone, a saddle, and a twisting flower. Finally, the magnitude of the shape transformation was controlled by varying the polymerization temperatures, and the actuation temperature was tuned by changing the amount of crystallinity in the polymer films. The simplicity and ease of control of our approach to program complex 3D structures from 2D semicrystalline polymer films make it a promising system for the aforementioned applications.