Prolonged exposure to aristolochic acid (AA) was shown to pose rapid progressive renal fibrosis in Belgian women in a slimming regime in the early 1990s. AA was also demonstrated to be strong carcinogen in rats. The carcinogenicity of AA is generally believed to be related to the nitro-reduction of AA, in which the aristolactam-nitriumion ion with a delocalized positive charge is the ultimate carcinogen. In this study, the phase I and phase II metabolism of AA was investigated by using an in vitro system with rat liver S9 and an in vivo animal study with Sprague-Dawley rats. AA was found to have been undergone hydroxylation, lactam formation, and desnitro and desmethyl transformations. Three conjugated metabolites of AA, namely the N- and O-glucuronides of aristolactams, were detected directly in pre-concentrated urine sample, with no acid hydrolysis or enzymatic digestion. Structural elucidation of the metabolites was performed by using liquid chromatography/tandem mass spectrometry (LC/MS/MS). The results indicated that N-glucuronidation was the major phase II metabolic pathway for the aristolactams formed by AA after their nitro-reduction.
To improve sweep efficiency for carbon dioxide (CO 2 ) enhanced oil recovery (EOR) up to 120 C in the presence of high-salinity brine (182 g/L NaCl), novel CO 2 /water (C/W) foams have been formed with surfactants composed of ethoxylated amine headgroups with cocoalkyl tails. These surfactants are switchable from the nonionic (unprotonated amine) state in dry CO 2 to cationic (protonated amine) in the presence of an aqueous phase with a pH less than 6. The high hydrophilicity in the protonated cationic state was evident in the high cloudpoint temperature up to 120 C. The high cloud point facilitated the stabilization of lamellae between bubbles in CO 2 /water foams. In the nonionic form, the surfactant was soluble in CO 2 at 120 C and 3,300 psia at a concentration of 0.2% (w/w). C/W foams were produced by injecting the surfactant into either the CO 2 phase or the brine phase, which indicated good contact between phases for transport of surfactant to the interface. Solubility of the surfactant in CO 2 and a favorable C/W partition coefficient are beneficial for transport of surfactant with CO 2 -flow pathways in the reservoir to minimize viscous fingering and gravity override. The ethoxylated cocoamine with two ethylene oxide (EO) groups was shown to stabilize C/W foams in a 30-darcy sandpack with NaCl concentrations up to 182 g/L at 120 C and 3,400 psia, and foam qualities from 50 to 95%. The foam produces an apparent viscosity of 6.2 cp in the sandpack and 6.3 cp in a 762-lm-inner-diameter capillary tube (downstream of the sandpack) in contrast with values well below 1 cp without surfactant present. Moreover, the cationic headgroup reduces the adsorption of ethoxylated alkyl amines on calcite, which is also positively charged in the presence of CO 2 dissolved in brine. The surfactant partition coefficients (0 to 0.04) favored the water phase over the oil phase, which is beneficial for minimizing losses of surfactant to the oil phase for efficient surfactant usage. Furthermore, the surfactant was used to form C/W foams, without forming stable/viscous oil/water (O/W) emulsions. This selectivity is desirable for mobility control whereby CO 2 will have low mobility in regions in which oil is not present and high contact with oil at the displacement front. In summary, the switchable ethoxylated alkyl amine surfactants provide both high cloudpoints in brine and high interfacial activities of ionic surfactants in water for foam generation, as well as significant solubilities in CO 2 in the nonionic dry state for surfactant injection.
In this paper, a functionally graded foam model is proposed in order to improve upon the energy absorption characteristics offered by uniform foams. In this novel model, the characteristics of the foam (e.g. density) are varied through the thickness according to various gradient functions. The energy absorption ability of the novel foam is explored by performing finite element simulations of physical impact tests on flat specimens of the functionally graded foam materials. Energy absorbing capacity w.r.t. parameters including gradient functions, density difference, average density, and impact energy, is explored in detail. It is illustrated that the functionally graded foam is superior in energy absorption to the uniform foam and that convex gradients perform better than concave gradients. The performance of such foams can be improved more if the density difference is enlarged. These findings provide valuable suggestions in the design of high performance energy absorption polymeric foams.
Summary The low viscosity and density of carbon dioxide (CO2) usually result in the poor sweep efficiency in CO2-flooding processes, especially in heterogeneous formations. Foam is a promising method to control the mobility and thus reduce the CO2 bypass because of the gravity override and heterogeneity of formations. A switchable surfactant, Ethomeen C12, has been reported as an effective CO2-foaming agent in a sandpack with low adsorption on pure-carbonate minerals. Here, the low mobility of Ethomeen C12/CO2 foam at high temperature (120 °C), high pressure (3,400 psi), and high salinity [22 wt% of total dissolved solids (TDS)] was demonstrated in Silurian dolomite cores and in a wide range of foam qualities. The influence of various parameters, including aqueous solubility, thermal and chemical stability, flow rate, foam quality, salinity, temperature, and minimum-pressure gradient (MPG), on CO2 foam was discussed. A local-equilibrium foam model, the dry-out foam model, was used to fit the experimental data for reservoir simulation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.