Nanomaterials have been widely used in many fields in the last decades, including electronics, biomedicine, cosmetics, food processing, buildings, and aeronautics. The application of these nanomaterials in the medical field could improve diagnosis, treatment, and prevention techniques. Graphene oxide (GO), an oxidized derivative of graphene, is currently used in biotechnology and medicine for cancer treatment, drug delivery, and cellular imaging. Also, GO is characterized by various physicochemical properties, including nanoscale size, high surface area, and electrical charge. However, the toxic effect of GO on living cells and organs is a limiting factor that limits its use in the medical field. Recently, numerous studies have evaluated the biocompatibility and toxicity of GO in vivo and in vitro. In general, the severity of this nanomaterial’s toxic effects varies according to the administration route, the dose to be administered, the method of GO synthesis, and its physicochemical properties. This review brings together studies on the method of synthesis and structure of GO, characterization techniques, and physicochemical properties. Also, we rely on the toxicity of GO in cellular models and biological systems. Moreover, we mention the general mechanism of its toxicity.

COVID-19 is an infectious disease that affects the respiratory system and is caused by the novel coronavirus SARS-CoV-2. It was first reported in Wuhan, China, on December 31, 2019, and has affected the entire world. This pandemic has caused serious health, economic and social problems. In this situation, the only solution to combat COVID-19 is to accelerate the development of antiviral drugs and vaccines to mitigate the virus and develop better antiviral methods and excellent diagnostic and prevention techniques. With the development of nanotechnology, nanoparticles are being introduced to control COVID-19. Graphene oxide (GO), an oxidized derivative of graphene, is currently used in the medical field to treat certain diseases such as cancer. It is characterized by very important antiviral properties that allow its use in treating certain infectious diseases. The GO antiviral mechanism is discussed by the virus inactivation and/or the host cell receptor or by the physicochemical destruction of viral species. Moreover, the very high surface/volume ratio of GO allows the fixation of biomolecules by simple absorption. This paper summarizes the different studies performed on GO's antiviral activities and discusses GO-based biosensors for virus detection and approaches for prevention.

Textile industry represents an important source of toxic substances rejected in environment. Indeed, effluent of these industries contains dyes and chemicals. They are rejected in environment without any treatment. The aim of this work is to evaluate ecotoxicological effect of industrial textile effluents on the sludge harvested from activated sludge treatment plant of Marrakech city (Morocco). For this, we are interested in determining the inhibition condition that corresponds to 50% decrease of bacterial activity in sludge. Obtained results showed that inhibition percentage of bacterial activity depends narrowly on contact time and on added effluent volume, until a limit concentration where there is no degradation of substratum. In fact, substratum degradation speed shows about 65 times decrease when 80% (v/v) of textile wastewater is added, in comparison with the controlled one. Consequently the inhibition constant (Ki) that corresponds to 50% of bacterial inhibition activity is estimated to 0.65 mg l−1 of dye. These studies confirm a real ecotoxicological risk of these effluents. Therefore, a treatment is mandatory before their rejection in environment.

No abstract

The objectives of this work were to carry out a complete characterization of textile wastewater, resulting from a textile unit located in the Marrakesh region. A physico-chemical characterization has been performed, focused on organic and toxicological aspects. The cladoceran Daphnia magna was used as the sensor organism and lethal concentration as a criterion to measure the toxicity of textile wastewater. The physico-chemical and toxicological status of a local textile effluent showed considerable values limitation, when compared to the European Union standard limit and Moroccan guide level and other studies. In view of those characteristics, the wastewater effluent from the textile industry should be considered to be treated before discharge to the environment.

In Morocco the textile industry, representing 31% of all Moroccan industries, is accompanied by high water consumption and important wastewater discharges rejected without any treatment. The focus of this study was to characterize the effluent from the textile industry, to test separately the effect of UV light and TiO2 catalyst and to determine the optimum conditions (pH, concentration and reaction time) in photocatalytic treatment to reduce chemical oxygen demand (COD) and colour. The biodegradability of the effluent was also studied using a toxicity test before and after treatment. After 90 min of reaction time at pH 4 and with 1.5 g F' of TiO2 catalyst, the photocatalytic treatment reached a global removal rate of 53% for COD and 89% for discoloration of the effluent. The relation BOD5/COD increased from around 0 to 0.3. The effluent became accessible to a biological treatment. The toxicity was studied by the Daphnia magna test over 24 hours. The results have shown the important toxicity of these effluents, which are rich in organic matter and other chemical compounds. After treatment by photocatalytic oxidation, the CI50 24 increased from 3.8% to 22.8%. This reduction of toxicity is related to the reduction of COD (53%) and colour (89%). Photocatalytic treatment has been shown to have an environmental benefit and, in combination with a secondary biological treatment, can be important for a significant reduction in the pollution of textile effluents.

The treatment of a synthetic textile wastewater, prepared with several compounds used in the finishing of textile materials, was comparatively studied by electrochemical methods such as electrooxidation (EO) (titanium electrode) and electrocoagulation (EC) (with aluminum and iron electrodes). The influence of pH, current density and operating time on the treatment was assessed by the parameters used to measure the level of organic contaminants in the wastewater; i.e. color, toxicity and chemical oxygen demand (COD). The experimental results showed that an effective electrochemical oxidation was achieved in which the wastewater was decolorized and 92% of COD was completely eliminated. In particular, the mineralization took place by indirect oxidation, mediated by active chlorine, and the treatment efficiency was enhanced by the addition of NaCl to the wastewater and by increasing the applied current density. The toxicity, still higher than the toxicity of the raw effluent, indicated a presence of toxic products after EO. Good results were obtained with the Al and Fe electrodes, mainly with respect to the removal of color and toxicity. EC is more economical than EO and the toxicity evaluation with the Daphnia magna test shows a significant reduction after EC.

No abstract