It is now well established that concrete deck slabs of slab-on-girder bridges subjected to concentrated loads develop an internal arching system provided that certain conditions of confinement of the concrete are met. Because of this arching system, the deck slab, being predominantly in compression, fails in punching shear rather than in flexure. This aspect of deck slab behaviour, coupled with the corrosion problems associated with steel reinforcement in concrete, has prompted the authors to investigate the feasibility of fibre-reinforced concrete decks that are entirely devoid of steel. Through tests on a small number of half-scale models, it has been established that fibre-reinforced concrete slab with inexpensive non-ferrous fibres is indeed feasible, provided that the top flanges of the steel girders are connected just below the deck by transverse steel straps and the concrete deck is joined to the girders and diaphragms by shear connectors. The straps and shear connectors together provide the restraint necessary for development of the internal arching system in the slab, whilst the fibres control cracking due to the effects of shrinkage and temperature in the concrete. This paper describes the exploratory model tests and presents their results. Key words: deck slab, fibre-reinforced concrete, internal arching, punching shear, slab-on-girder bridge.

No abstract

No abstract

SUMMARY Vibration‐based damage detection (VBDD) comprises a promising set of techniques for damage detection and health monitoring of civil engineering structures. However, the successful application of these methods to real structures is still a challenging task, due primarily to the large size of such structures and the relatively high levels of variability in their dynamic response under operational load conditions. In this paper, a new methodology is introduced for the application of VBDD techniques, with the goal of enhancing their effectiveness for identifying and locating low damage levels and improving their applicability to the continuous or periodic health monitoring of structures. The basic features of the methodology include the use of a controlled and consistent excitation force, the use of operational deflection shapes (ODSs) at all measured frequency increments rather than only at natural frequencies, the use of a logarithmic scale for representing the ODS amplitudes at each frequency increment and the establishment of a threshold level for damage detection that accounts for experimental variability. The performance of the proposed methodology is verified and demonstrated by applying several Level 1 (damage detection) and Level 2 (damage localization) VBDD techniques using experimental data measured on a steel girder taken from a railway bridge. The proposed approach is shown to perform very well at detecting, locating and monitoring the growth of damage. Copyright © 2011 John Wiley & Sons, Ltd.

No abstract