A B S T R A C TThe impact of various operating parameters, including pH (2-12), concentrations of modified zeolite (0.1-1.25 g/L), initial concentration of Cr (VI) (0.1-1.5 mg/L), and contact time (5-120 min), was investigated on the removal of Cr (VI) from water through different experimental runs in the batch system. The results showed that modified zeolite had best performance for the removal of Cr (VI) at the pH 7. The time required for the removal of 90.95% of the Cr (VI) from a 1 mg/L solution was about 80 min using modified zeolite. The equilibrium assessment illustrated that the Langmuir model is the best fit for the experimental data, which attains a maximum adsorption capacity of 4.4 mg/g. Pseudo-second-order kinetic model was found to adequately describe the adsorption process. In the final part of the study, the efficacy of modified natural zeolite was examined to simultaneously removal of Cr (VI) and As (V) from aqueous solution. In summary, modified natural zeolite is an efficient in performance, simple to operate, and economical process and thereby affordable technology for the removal of Cr (VI) from the contaminated water source.

No abstract

No abstract

No abstract

The main purpose of this work was to investigate the removal of humic acid (HA) from aqueous solutions using MgO nanoparticles as a novel adsorbent. The effect of contact time, competing anions in the aqueous solutions, for the removal of HA in batch system was studied. The nanoparticle was characterized by scanning election microscope method. Experimental results show that MgO nanoparticles can remove more than 90% of HA under optimum conditions. The results showed that the examined interfering anions influenced the HA removal. The adsorption kinetics and isotherm were also studied. The adsorption kinetics was well described by the pseudo-second-order equation, and the adsorption isotherms were better fitted by the Langmuir model.

No abstract