No abstract

Abstract:There is currently high interest in developing automated methods to assist the updating of map databases. This study presents methods for automatic detection of buildings and changes in buildings from airborne laser scanner and digital aerial image data and shows the potential usefulness of the methods with thorough experiments in a 5 km 2 suburban study area. 96% of buildings larger than 60 m 2 were correctly detected in the building detection. The completeness and correctness of the change detection for buildings larger than 60 m 2 were about 85% (including five classes). Most of the errors occurred in small or otherwise problematic buildings.

No abstract

Due to the abandonment of former agricultural management practices such as mowing and grazing, an increasing amount of grassland is no longer being managed. This has resulted in increasing shrub encroachment, which poses a threat to a number of species. Monitoring is an important means of acquiring information about the condition of the grasslands. Though the use of traditional remote sensing is an effective means of mapping and monitoring land cover, the mapping of small shrubs and trees based only on spectral information is challenged by the fact that shrubs and trees often spectrally resemble grassland and thus cannot be safely distinguished and classified. With the aid of LiDAR-derived information, such as elevation, the classification of spectrally similar objects can be improved. In this study, we applied high point density LiDAR data and colour-infrared orthoimages for the classification of shrubs and trees in a study area in Denmark. The classification result was compared to a classification based only on colour-infrared orthoimages. The overall accuracy increased significantly with the use of LiDAR and, for shrubs and trees specifically, producer's accuracy increased from 81.2% to 93.7%, and user's accuracy from 52.9% to 89.7%. Object-based image analysis was applied in combination with a CART classifier. The potential of using the applied approach for mapping and monitoring of large areas is discussed.

Abstract:In order to better understand and exploit the rich information content of new remotely sensed datasets, there is a need for comparative land cover classification studies. In this study, the automatic classification of a suburban area was investigated by using (1) digital aerial image data; (2) digital aerial image data and laser scanner data; (3) a high-resolution optical QuickBird satellite image; (4) high-resolution airborne synthetic aperture radar (SAR) data; and (5) SAR data and laser scanner data. A segment-based approach was applied. The classification rules for distinguishing buildings, trees, vegetated ground, and non-vegetated ground were created automatically by using permanent test field points in a training area and the classification tree method. The accuracy of the results was evaluated by using test field points in validation areas. The highest overall accuracies were obtained when laser scanner data were used to separate high and low objects: 97% in Test 2, and 82% in Test 5. The overall accuracies in the other tests were 74% (Test 1), 67% (Test 3), and 68% (Test 4). An important contributing factor for the lower accuracy in Tests 3 and 4 was the lower spatial resolution of the datasets. The classification tree method and test field points provided a feasible and automated means of comparing the classifications. The approach is well suited for rapid analyses of new datasets to predict their quality and potential for land cover classification.